Durafly MFX Racer 715/815mm EPO Orange/Green 4S RC plane PNF MAIDEN FLIGHT скачать в хорошем качестве

Durafly MFX Racer 715/815mm EPO Orange/Green 4S RC plane PNF MAIDEN FLIGHT

Get your MFX racer throu Petrincic Bros here: https://hobbyking.com/en_us/durafly-p... Get your Flying Tiger radio tray and harness here: https://flyingtigerrc.com Get your Petrincic Bros RC merch here: https://petrincic-bros-rc.creator-spr... Petrincic Bros RC Tshirts and hats here: https://shop.spreadshirt.com/petrini-... SPECIAL THANKS AND SALUTE TO PETRINCIC BROS BIGGEST SUPPORTERS ( DONATORS ): -FREDERICK TICE -MARK BAUER -DANYEL VAN BEEK -ANDY BUTLER -KEITH GOODE And ofcourse to all of you that come here, have fun with us, leave comment subscribe and give thumb up. After the success of the EFX Racer, it was decided to produce a mini version, as they say, all good things also come in small packages, so the MFX Racer was born. The MFX has been designed to the same exacting standards as its bigger brothers and still offers speed, strength, agility, and the stability you have come to expect from a Durafly model. In addition, you get the simplicity of assembly and the quality that only an EPO model from Durafly can offer. With a minimal part count and assembly time, the MFX Racer simply clips and screws together in less time than it takes to charge a battery. The MFX Racer on its 4S setup is fast, but it still feels exceptionally stable and gives the pilot that locked-in feel. Yet unlike most speed machines, it also has exceptionally good slow-speed handling. With its 4-channel control, the MFX Racer is also very aerobatic, with big loops, fast rolls, knife edge, snaps, and spins, the MFX Racer can do them all and more, its only limit is you the pilot! The MFX has 2 wingtip options (both are supplied in the box), a standard 815mm option, or the 715mm clipped wing option. The standard wing setup gives a much better climb rate, whilst the clipped wing setup dramatically increases the roll rate. Being "Plug N Fly" it is supplied with the following pre-installed components, a 2212-2200KV brushless outrunner motor, Aerostar G2 30A ESC, 2 x 8g MG servos, and 2 x 5g MG servos. Also supplied are a 5x5 prop, spinner, linkages, screws, and a decal sheet with race numbers, etc. The MFX Racer is a small model with an exceptional pedigree, it flies with incredible precision and has loads of control authority for exceptional aerobatics. The MFX Racer is an excellent fun model that also has a great turn of speed, it will excite and put a big smile on the face of the pilot and spectators alike! Features: • Supplied "Plug N Fly" with motor, ESC, and metal-geared servos • Minimal parts count means it offers a fast build time • Its EFX pedigree means it is fast and agile • Has excellent low-speed handling for smooth, safe, landings • Suitable for intermediate, and experienced pilots • Manufactured in tough, lightweight, EPO foam • Includes a colorful decal sheet including race numbers Specs: Type: Durafly (PNF) MFX Racer Wingspan (Standard): 815mm (32.1") Wingspan (Clipped): 715mm (28.1") Length: 566mm (22.3") All Up Weight: Approx 320g (11.29oz) depending on battery used Weight (no battery): 230g (8.11oz) Motor: 2212-2200kv brushless outrunner (pre-installed) ESC: Aerostar 30A G2 brushless (pre-installed) Servo: 2 x 8g metal geared, 2 x 5g metal-geared (pre-installed) Prop: 5x5E (included) Controls: 4 Channel (Throttle, Ailerons, Elevator, Rudder) Color: Orange Recommended Battery (not supplied): 800~850mAh 4S (14.8V) 25C or higher LiPo Included: 1 x Durafly MFX Racer airframe (Orange) 1 x 2212-2200KV brushless motor 1 x Aerostar G2 30A brushless ESC 2 x 8g metal-geared servo 2 x 5g metal-geared servo 1 x 5x5E propeller 1 x Decal sheet 1 x Accessory pack Required: 4ch (or more) transmitter with a small, compact receiver 800~850mAh 4S (14.8V) 25C or higher LiPo battery Suitable LiPo charger