AllSecure Camera Modes Tutorial (Jan 2024) скачать в хорошем качестве

AllSecure Camera Modes Tutorial (Jan 2024)

This tutorial focuses on how to setup and use the 'mesh modes' of the AllSecure (650 and 600) series from Swann. A mesh network is a group of networking devices that act as a single Wi-Fi network. This can provide better Wi-Fi coverage over a wider space. If you have a large house, additional Wi-Fi extenders can be added to provide better coverage over a wider space. As your cameras can operate in Mesh mode, this gives you greater flexibility on where each camera can be mounted without signal degradation. Camera Pairing Instructions: 1. In Live View mode, click a channel that you want to pair the camera to. 2. Press the blue Pair button to commence pairing. A message will appear stating that you need to press the pair button on the camera (as shown on the bottom left). 3. Press and hold the pair button for 3 seconds, then release. The pairing will commence, and the camera’s IR LEDs will start flashing. 4. After a short moment, the camera will pair, and you will see the camera’s image on-screen. If the camera fails to pair, repeat the above instructions, and try again. Product codes: SWNVK-650KH2 - 2 Camera version SWNVK-650KH3 - 3 Camera version SWNVK-650KH4 - 4 Camera version