Accuracy that matters: iTero Lumina™ intraoral scanner for full-arch restorations скачать в хорошем качестве

Accuracy that matters: iTero Lumina™ intraoral scanner for full-arch restorations

A tiny error can make or break a long-span restoration. A single iTero Lumina™ scan is within the accuracy threshold of photogrammetry for full-arch implant restorations*. According to a recent study published in the Journal of Dentistry, iTero Lumina™ scanner delivered the highest ratio of acceptable scans, 99.6 % across all tested conditions**. With itero Lumina™, you can capture simple to complex cases in one uninterrupted single pass, achieving predictable and repeatable first-time restoration fit*, thanks to superior full-jaw accuracy*** #itstartswithiTero #iTero #iTeroLumina *Based on bench testing conducted in January 2025 according to ISO 20896-2:2023 vs. Ground truth: Imetric icam 4D Photogrammetry system; Sample size: n=10; 5 upper arch model (All-on-6) and 5 lower arch model (All-on-4). Thresholds were defined as Horizontal error less than 50µm ; Vertical error less than 30µm 2 & Angular deviation less than 0.4o **All scanners assessed in this study demonstrated mean relative errors of trueness of less than 0.25 % of the scanned distance, a threshold established by the ADA/ANSI 132 guidelines as clinically acceptable for long-span digital intraoral imaging. Lumina™ scanner delivered the highest ratio of acceptable scans, 99.6 % across all tested conditions. ***Based on bench testing conducted using ADA/ANSI 132 standard Model simulating “long distance accuracy (full jaw measurement)” in July 2024. Sample definition: 3 operators performed 30 repetitive scans with each tested scanner; Sample size: n=90 (3x30) scans for each scanner tested; Tested scanners: iTero Lumina™ , Trios 5, CS3800, Medit i700, Alliedstar; Results: The accuracy of iTero Lumina™ is significantly higher than that of all 4 competitors; with a reduction of total error ranging from 0.11% to 0.46%. Accuracy was defined as the accumulated average error + STD of all measurements specified in the standard. Data on File at Align Technology, as of August 26, 2024