How to Build Big F-22 Raptor RC Plane with Foam Board скачать в хорошем качестве

How to Build Big F-22 Raptor RC Plane with Foam Board

Because our last big size Su-30 went so good, we made another big size jet again, this time is F-22 Raptor. With slightly smaller wingspan but with the higher wing area compare to my Su-30. Also with the lighter weight, only about 1 kg, make it even smaller wing loading. It flies really great with 4S 2200mAh Lipo battery, 50A ESC and 10x6 prop. I also put landing gear set to the model and it perfectly take off from a runway, but to able to did that I had to swap the propeller with 8 inch from 10 inch prop, so the prop won't strike the asphalt. I think this model can be converted into EDF model jet, because the space on the body of this model is very spacious. Go here for the plans : https://paper-replika.com/index.php/r... Join this channel to get access to perks:    / @juliusperdana   Specs : 1. Wingspan 1000mm / 39.37 inches 2. Flying weight : 1028 grams/ 36.3 oz 3. Wing loading :20.4 gram/dm2 - 6.7 oz/sq.ft. 4. Wing cube loading : 2.9 5. Wing Area : 50.35 dm2 / 780 sq.in. 6. CG : 13.7 cm / 5.39 inch from Wing Break Electronics for test : DXW 3536 1200kv Prop 10x6 (2 blades) 50A ESC Battery Lipo 4S 2200mah 4 x 9 gram servos (micro servo) Materials : 1. 5mm Foamboard/ Depron/ Polyfoam 2. 10mm Carbon Tube/ Bamboo/ Wood Dowel 1 meter 3. 0.3mm Mica Plastic 4. hot glue, UHU glue, CA glue, PVA glue 5. Wax paper