У нас вы можете посмотреть бесплатно 1 incastro del manico parte prima или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
Incastro del manico nella cassa di violino, dopo aver formato il manico e le giuste dimensioni del tallone (vedi video "Lavorazione del manico parte prima, seconda, terza, quarta e quinta") ENGLISH TRANSLATION OF THE WRITTEN NOTES IN THE VIDEO, IN ORDER OF APPEARANCE 00:05 - Fitting the neck into the body - Part One 00:21 - Mark the measures of the heel on the soundbox 01:00 - Mark the depth of the mortise 01:10 - Cut well with a knife 01:28 - Cut the edge of the top 01:52 - Remove the edge portion up to the block 02:12 - Saw the sides of the mortise with an appropriate hacksaw, remaining well within the marks 02:49 - Complete the cut with a knife reaching the button 02:57 - Use a chisel 18 mm wide for roughing the mortise 03:41 - Also cut sides closer to the marks, being careful not to damage the button 04:03 - With a rasp (sandplate) of appropriate shape flatten the block surface.... 04:11 - .... and sides of the mortise 04:27 - With a chisel 6 mm wide finish with accuracy the corner so that they not remain rounded 04:51 - Insert the neck to verify measurements, which at this point must be abundant a few millimeters with respect to the definitive measures 05:02 - Neck width (+1mm approx) 05:08 - Heel overstand (+3 mm approx) 05:15 - Fingerboard to belly height (+3 mm approx) 05:21 - Check also by eye that the neck is well straight with respect to the soundbox Index of videos : http://davidesora.altervista.org/videos/ Website : http://www.davidesora.it/