Toyota Wheel Stud Replacement | Tacoma 4Runner T100 Tundra скачать в хорошем качестве

Toyota Wheel Stud Replacement | Tacoma 4Runner T100 Tundra

How to remove wheel stud and install new wheel stud on a Toyota Tacoma! More BELOW Tool List: Jack Stands/Jack M12x1.5 by 40mm wheel stud M12x1.5 open hex nut Bigger hex nut for bearing. I used a M14 open hex nut (2) M8X1.25 bolts to remove drum brake cover Hammer, I used 5lb hammer so that I wouldn't need to swing too hard and possibly damage another component **If you don't have an impact gun you can use a ratchet with long extension for rear wheels drive wheels. For front wheels, the hub spins freely so you'll need (2) ratchets. One ratchet to pull stud through wheel hub as shown and another ratchet attached to a second stud/lug nut that will engage ground as you turn hub. This will keep your wheel hub from spinning. You'll most likely need a long extension or "cheater" bar to get enough length for ratchet handle to reach ground. Disclaimer: Due to factors beyond the control of Engineered Mojo, I cannot guarantee against improper use or unauthorized modifications of this information. Engineered Mojo assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Engineered Mojo recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Engineered Mojo, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Engineered Mojo. Music: You're free to use this song and monetize your video, but you must include the following in your video description: I Don't See the Branches, I See the Leaves by Chris Zabriskie is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...) Source: http://chriszabriskie.com/dtv/ Artist: http://chriszabriskie.com/