Seal metal Roof Seams and Screws скачать в хорошем качестве

Seal metal Roof Seams and Screws

Turbo Poly Seal - https://bergstromm.com/ More videos on repairing leaks on a metal roof -    • Metal Roof Coating gone bad. Do not get ca...   #diy #metalroof How to Fix a Leaking Metal Roof Seam and Screws All right, we’ve got a leaking metal roof. We've done a lot of leak repairs on the roofs around here, but this one developed another leak over the winter. Ice built up, and we assume the leak is along this seam. You can’t see it just by looking, so let me show you something important. First, you never need to coat a roof unless there's rust. No rust means no need for a coating. The only thing you need to do is find the leak. Now, all the screws have already been addressed—you can see that every screw is covered with Turbo Poly Seal, so we know it's not leaking from the screws. That means we’re left with two possibilities: the seam itself or this screw with visible rust around it. I'm going to show you how to fix this step by step. This is a common issue; if you follow along, you can repair it yourself. Step 1: Cleaning the Surface First, I determined the leak is within a 20x20 ft section, so I’ll focus on this area. I cleaned the surface using my angle grinder with a wire brush attachment. Look at this—this is just dirt. See how my finger gets dirty? You can’t apply sealant over dirt or dust; it won’t stick. So, I brush it off with steel until it's nice and clean. Then, I wipe it down to ensure I have a solid surface to work on. Now, we're ready for the next step. Step 2: Applying the Sealant and Fleece Once I’ve mixed my sealant, I apply a coat directly over the seam—this is the easiest and most effective way to fix a leaking metal roof seam. Next, I place the fleece over the seam, making sure it covers the entire area but doesn’t go over the screws. This step is crucial because you cannot apply sealant over a seam without using fleece. If you do, it will crack and fail over time. The fleece reinforces the seal and prevents any future leaks. Now, I apply another coat of sealant over the fleece. Here’s something significant—today is windy, and you don’t want any gaps in the fleece, especially at the corners. If there’s a small gap, water will find its way in and cause problems. Watch how I press the fleece into the corner, ensuring it conforms to the roof's ridges. No gaps. That’s key to a long-lasting repair. After that, I apply a second coat over the fleece and dab sealant over every screw. These screws were already sealed before, but I always double-check and touch them up just in case. And that’s it—this seam is now fully sealed and won’t leak anymore. Step 3: Fixing a Leaking Screw Now, let me show you how to properly fix a leaking screw. Here’s a screw that wasn’t sealed correctly before. I removed the old sealant, and you can see the problem—the neoprene washer is rusty, meaning it wasn’t sealing properly. That’s why water was getting in. To fix this, I take the screw out and clean the area with a wire brush. You cannot put the same size screw back in—it won’t hold properly. Instead, I replace it with a slightly larger screw, making sure the new neoprene washer is in good condition. Now, I apply a small dab of Turbo Poly Seal over the screw to protect it from rust and ensure a watertight seal. That’s it—this screw will not leak anymore. Final Thoughts And that’s how you fix a leaking seam and a leaking screw on a metal roof! Simple, effective, and long-lasting. If you found this helpful, give it a thumbs up, and I’ll see you in the next video Chapters; 0:00 - No need for coating the roof 1:18 - Cleaning the surface 2:31 - Using a Liquid Sealer 6:41 - Replace Screws and Seal