LiveTime FPV and LapRF 8-Way Setup for Racing скачать в хорошем качестве

LiveTime FPV and LapRF 8-Way Setup for Racing

In this video we will go over setting up the LapRF 8-Way to connect to your computer and work with LiveTime. The basic steps are below: On The LapRF 1. Select Communication and eth ip 2. Set the address to 192.168.1.2 3. Use the left arrow to back out to main menu 4. Select Settings and Save Now In LiveTime 1. Click the red decoder tab in the top right 2. Click on network connections 3. Right click on your ethernet connection and select properties 4. Double click on Internet Protocol Version 4 5. Click use the following ip address: 6. Enter 192.168.1.1 for the ip address, 255.255.255.0 for the subnet mask, and 192.168.1.1 for the gateway 7. Leave DNS addresses blank 8. Click ok and go back to LiveTime 9. Make sure ImmersionRC LapRF is selected on the left dropdown 10. Enter in 192.168.1.2 in the IP Address box and the red icon should turn to green if its connected 11. Navigate to the Communication tab to make sure status records are coming through every couple seconds