S6E8 Mast Refit Part 3//Installing backing plates inside a mast//pop rivet and tap selection// скачать в хорошем качестве

S6E8 Mast Refit Part 3//Installing backing plates inside a mast//pop rivet and tap selection//

In Part 3 of the Mast Refit I explain and demonstrate how to install an aluminum backing plate inside an aluminum spar. You can use this technique to install backing plates for a winch, cleat, and rope clutche. I also share some info on pop rivet selection. Refitting the mast is a multi-part series. Link to bore scope I use. I receive no commission. Looks to be on sale for $40: https://www.amazon.com/dp/B08PP4P6WD?... The Far Reach is highly modified Cape Dory 36 I built from a gutted hull and deck over a six year period in a shed in our backyard in North Carolina. This was a complete rebuild retaining only the hull, deck, portlights, hatches, and a few cleats. Click here for a video summarizing the rebuild:    • S4 E1//From Gutted Hull to Ultimate Voyagi...   In Season 5 I singlehanded the Far reach from North Carolina to the Virgin Islands in December 2021. It was my third voyage in the Far Reach to the Virgin Islands. In May of 2022 I single-handed the Far Reach back home to NC via the offshore route, a non stop voyage of about 1,440 Nautical miles. In the previous Season 4 episodes I shared what it took to rebuild our 36' sailboat from a complete gutted hull and deck into my ideal voyaging boat, installed a small inboard Diesel engine with a folding propeller, and made some additional improvements to the Far Reach. Click here for a video on a from scratch installation of an inboard diesel engine including shaft long and folding two blades propeller:    • S4EP2//Installing an Inboard Diesel Engine...   Previous episodes recap: Season 1, Episode 1, contains a short synopsis of a six year total rebuild of the Far Reach from a gutted bare hull. I also double hand the Far Reach offshore with my sister from NC to the BVI. In Season 2, I single-hand the Far Reach from Sint Maarten back to NC. In Season 3, I share my Single-handed voyage from NC to the BVI as well as from the VI back to NC. In Season 4, I detailed the original rebuild of the Far Reach then the planning and installation of a small diesel engine with a folding propeller. I concluding by sharing some additional modifications and upgrades as well as trouble shooting the Cape Horn windvane. To learn more about the rebuilding of the Far Reach: http://www.farreachvoyages.com To read about this voyage, and many others, including additional modifications and updates to the Far Reach since her launch in 2015: https://www.farreachvoyages.net For more information on the Stimson Bow Roof Shed visit https://bow-roof-shed.com If you have questions or stories to share about your own voyages feel free to post them in the comment section. Happy sailing.