Manual Tool Change on a TRAK ProtoTRAK RMX DPM RX3 milling machine скачать в хорошем качестве

Manual Tool Change on a TRAK ProtoTRAK RMX DPM RX3 milling machine

Step 1, Press the DRO button on the screen. This shows the positions of each axis. Step 2, Next, press the JOG button on the screen, to enable the head to raise or lower. And, press the Z button to raise the head high enough to allow loading the tool into the spindle. Step 4, Load the Tool gripping low on the Tool, to keep from pinching your hand, load the tapered side into the spindle first, carefully aligning the two keys with the undercuts in the sides of the Tool. Then, while pushing upward, press the IN button to drawbar the Tool into the spindle taper. Step 5, Next, Press the - minus button, and the Feed should show a negative sign. Then, Very, Carefully, tap the Z button a little at a time to lower the head to the desired position for machining. Then press the RETURN button on the screen. Success!