How to Replace Lower Control Arm 2009-2014 Ford F-150 скачать в хорошем качестве

How to Replace Lower Control Arm 2009-2014 Ford F-150

Buy Now! New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ia-1ASLF00745 This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2009-2014 Ford F-150. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This repair was done on a 2009 Ford F-150 Lariat 5.4L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles: 2009 Ford F-150 2010 Ford F-150 2011 Ford F-150 2012 Ford F-150 2013 Ford F-150 2014 Ford F-150 Tools you will need: • Pry Bar https://trq.video/oUn-1AXAA00020 • 27mm Wrench • 10mm Socket https://trq.video/obc4-1AXAA00017 • 13mm Socket https://trq.video/obwY-1AXAA00015 • 15mm Socket https://trq.video/obwY-1AXAA00015 • 18mm Socket • 21mm Socket • 22mm Socket https://trq.video/ooM-1AXAA00266 • 24mm Socket • 27mm socket https://trq.video/oX-1AAST00007 • 30mm Socket • 8mm Socket https://trq.video/obc4-1AXAA00017 • 1/2 Inch Impact Gun https://trq.video/otr-1AXAA00252 • 3/8 Inch Impact Gun • 1/2 Inch Breaker Bar https://trq.video/oqH-1AXAA00078 • Ratchet https://trq.video/obCL-1AXAA00016 • Swivel • Torque Wrench https://trq.video/oaGv-1AXAA00044 • 1-1/16 Inch Wrench • Anti-Seize Grease • Brake Parts Cleaner • Gloves https://trq.video/oaaL-1AXSS00048 • Safety Glasses • Floor Jack https://trq.video/o6E-1AXAA00068 • Hammer • Jack Stands https://trq.video/oUx-1AXAA00065 • Large Hammer • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Ford F150 2009-2014 12th Gen:    • Ford F150 2009-2014 12th Gen   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.