У нас вы можете посмотреть бесплатно How to Wash and Flush your Sea-Doo Jetski Properly или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
How To Clean Your Jet Ski | Tips To Stop Salt Water Corrosion. Salty Captain Products LINK: https://www.saltycaptain.co?sca_ref=7... 15% Discount CODE: OCEANSIDEGUY15 Rinse Immediately: As soon as you can, rinse the Sea-Doo with fresh water. If possible, do this at the ramp or dock to remove as much salt as you can right after use. Flush the Engine: Connect a garden hose to the flushing port, following the manufacturer's instructions. Start the engine and let it idle for a few minutes while water flows through the cooling system. This helps flush out any saltwater that may have entered. Wash the Exterior: Use a hose or bucket of fresh water to wet the exterior. If necessary, apply a mild soap or marine cleaner to a soft sponge or cloth and gently scrub the surface to remove marine growth, dirt, and grime. Avoid abrasive cleaners or scouring pads that could scratch the surfaces. Pay special attention to areas where salt build-up can accumulate, such as the jet intake and surfaces around the engine compartment. Rinse Thoroughly: Make sure to rinse off any soap or cleaner completely with fresh water. Dry the Sea-Doo: Use towels to dry off the exterior completely. Pay attention to areas that can trap moisture, such as under the seat and inside the storage compartments. Inspect and Clean Accessories: If your Sea-Doo has accessories or attachments (like a tow hook or storage compartments), inspect and clean these as well to ensure there’s no salt build-up. Apply Protective Wax (Optional): After the Sea-Doo is completely dry, you can apply a marine wax to the hull to provide a protective barrier against UV light and saltwater. Store Properly: Ensure your Sea-Doo is stored in a cool, dry place or covered to protect it from further environmental exposure. Additional Tips: Regularly check for any corrosion or damage to metal parts, especially those exposed to saltwater. Consider using an anti-corrosion spray on metal components after cleaning. Always consult your Sea-Doo owner's manual for specific cleaning and maintenance tips related to your particular model. By following these steps, you'll help ensure that your Sea-Doo remains in good condition and free from the damaging effects of saltwater. Sea-Doo recommends flushing the exhaust system for no more than 2 minutes with a fresh water hose to prevent damage to the carbon seal. This is because the engine's cooling system is a closed loop, and running the engine out of water can cause overheating and seal failure. Always start the engine just before attaching the hose and disconnect the hose before shutting down the engine.