Скачать с ютуб Klipsch ProMedia 2.1 Post Input Plug Continuity Test (System #1 - Doesn't Power On) в хорошем качестве

Klipsch ProMedia 2.1 Post Input Plug Continuity Test (System #1 - Doesn't Power On)

Update from:    • Klipsch ProMedia 2.1 Post R16 & R17 R...   Link to stpeteshepherd eBay for parts/upgrade kit: https://www.ebay.com/sch/stpeteshephe... Found no sound coming out of the right speaker using the 1/8" barrel plug input. Found sound coming out both speakers when using the Line In input. Checked the wires for the input cable on the POD and found that the center section of the plug wasn't conductive with any of the wires for the input cable on the PCB. Therefore, I cut the input cable 1/8" barrel plug off since I figured I'd have to cut the wire anyway. Well... then checking conductivity I found that the red wire was the PCB wire for the input cable plug wire that wasn't conductive and is now. So, basically I just need to install a new 1/8" stereo barrel plug. I also tested to verify the subwoofer is working on a known working subwoofer system. This rules out the POD as the issue with the subwoofer not working on this system.