Water cooling Corsair H 150 i PRO RGB XT. скачать в хорошем качестве

Water cooling Corsair H 150 i PRO RGB XT.

I want to present to your attention the liquid cooling system of the processor from Corsair-H150i RGB PRO XT. Table of contents: 0:00 Introduction. 0:56 Unpacking. 3:46 Pump and radiator. 6:11 Mounting accessories (screws, cover plate on the back of the motherboard and brackets for AMD AM3-4, TR4). 7:34 An old be Quiet Dark Rock 4 cooling fan and a test of its performance. 8:06 Installation of the water cooling system. 8:19 About the radiator (dimensions and description). 9:16 Installation of ML120 series fans (magnetic levitation, characteristics and operating modes of fans). 9:52 Installing the radiator on the sled of the be Quiet Silent Base 801 case. 10:33 Installing the mounting plate on the back of the motherboard, the sled with the radiator and the water block on the processor. 11:22 Connecting the fans to the pump, the three-pin connector to the motherboard and the pump power supply. 11:36 General view of the water cooling system. 11:55 Connecting the micro-USB to the pump. 12:09 The iCUE program. 14:29 Illumination (description, options and demonstration). 16:23 The main panel of the iCUE program. 16:37 Testing of the H150i. 19:27 Conclusion. In the box we see the warranty manual and instructions for installing the pump, three 120 mm ML120 series fans that have four-pin connectors with PWM control. They use magnetic levitation instead of ball bearings, i.e. the technology of centering the fan rotor axis with magnets. Rotation speeds: 400-2400 rpm. These fans can be called" quiet " at speeds of rotation of the impeller up to 900 rpm. There are mounting brackets and screws for attaching fans and pumps to the motherboard. The main element that dissipates heat is a black aluminum radiator, 360 mm long, with connected tubes in a protective casing for supplying and removing coolant from the pump. The pump is combined with a water block with a small size. On the reverse side of the pump there is a copper plate with a thermal paste applied, which is protected by a plastic cover, but the problem is that the manufacturer did not provide an additional tube of paste. From the pump there are wires with four-pin connectors for connecting three fans, a wire for powering the pump via the SATA interface, a three-pin connector for transmitting information about the pump speed and eliminating pump-motherboard conflicts. There is a standard cover plate with a sticker for better mounting on the back of the motherboard. There are brackets for mounting the pump on the AM3, AM4 and TR4 sockets of AMD processors. The bag with screws contains a rich set of fasteners. There is a DATA cable for transmitting data on the temperatures and speeds of fans and pumps to a special iCUE program. To manage Corsair devices, a free, fully Russified iCUE program is used, which is available for download on the official website of the manufacturer. One of the main interfaces of the program are two sections: "Lights" - for controlling RGB effects and the "Configuration" section - for setting the operating modes of fans and pumps. The user can choose one of the four set operating modes: 1. Quiet-rotation speed of 1960 rpm. 2. Balanced–2340 rpm. 3. Extreme–2660 rpm. In the program section of the same name, you can monitor the work schedule of all system nodes. You can set the states, the execution of which is critical, up to the shutdown of the PC. In fact, the "Quiet" mode of operation is less comfortable by ear than the balanced one, since when it is activated, the pump begins to chirp slightly. At maximum speed, the pump is barely audible. As for the fans, their maximum speed in the "Extreme" mode was-2400 rpm. As a result, when using the stress test in the Aida Extreme program, the CPU temperature was 73-74 degrees Celsius for 10 minutes with 100% stone loading. In the iCUE program, the "Extreme" mode was selected for all system components. The H150i PRO XT received a magnificent illumination of 16 RGB LEDs, 12 of which are located on the edges of the water block, and 4–in the center under the logo. You can control the backlight in the "Lights" section. Conclusion. The system can divert 200-250 watts of thermal power. You can close your eyes to the lack of illumination of the radiator fans. The Corsair system has a high-quality performance, and thanks to the iCUE program, you can flexibly manage the noise balance of the entire system. It is advisable to leave the pump running in a balanced mode. #h150i pro xt распаковка #corsair h150i pro xt распаковка #corsair icue h150i rgb pro xt распаковка #h150i pro rgb установка #corsair h150i pro охлаждение #corsair h150i pro rgb xt #H150i pro xt rgb #Corsair h150i pro rgb #corsair h150i pro rgb intel