Smooth-On - OOMOO 30 Silicone Mold Making Rubber and KitMerchant Video скачать в хорошем качестве

Smooth-On - OOMOO 30 Silicone Mold Making Rubber and KitMerchant Video

◀ Silicone Mold Making Rubber Kit ▶ 📦 The product links are in this description or in the comment down below ⬇️ 📦 VIEW ON AMAZON: https://geni.us/BG2Xog --------------------------------------------------------------------------------------------------------------------------- Store and use the material at room temperature (73°F/23°C). Storing material at warmer temperatures will also reduce the usable shelf life of unused material. These products have a limited shelf life and should be used as soon as possible. Premix Parts A and B thoroughly before using. OOMOO 30 Cure Inhibition - Silicone rubber may be inhibited by certain contaminants in or on the pattern to be molded, resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. If compatibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of rubber onto a non-critical area of the pattern. Inhibition occurs if the rubber is gummy or uncured after the recommended cure time has passed. Materials found to cause cure inhibition include sulfur-based modeling clays and latex rubber. To prevent inhibition apply a sealing agent, apply a “barrier coat” of clear acrylic lacquer sprayed onto the clay surface. Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if the performance of this material is in question. Measuring & Mixing - Before you begin, pre-mix Parts A and B thoroughly. After dispensing equal amounts of Parts A and B into the mixing container, mix thoroughly for 3 minutes making sure that you scrape the sides and bottom of the mixing container several times. The mixture should have a uniform color with no color streaks. If you observe color streaks, continue mixing until they are eliminated. Pouring – For best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model. A uniform flow will help minimize entrapped air. The liquid rubber should level off at least 1/2” (1.3 cm) over the highest point of the model surface. --------------------------------------------------------------------------------------------------------------------------- 🏷️ CHECK THE PRICE ON AMAZON: https://geni.us/BG2Xog 🔥BEST OFFERS on Amazon TODAY!🔥 🚚 GET FREE SHIPPING with Amazon Prime! - Register here and get a 30-DAY FREE TRIAL ➡️ https://geni.us/GetFREEShipping 📼 GET a 30-DAY FREE TRIAL for AUDIBLE here ➡️ https://geni.us/GetAUDIBLETrial 🎬 GET a 30-DAY FREE TRIAL for PRIME VIDEO here ➡️ https://geni.us/GetPRIMEVIDEOTrial 🎧 GET a 90-DAY FREE TRIAL for AUDIBLE PLUS here ➡️ https://geni.us/GetAUDIBLEPLUSTrial 🥑 GET a FRESH GROCERY DELIVERY here ➡️ https://geni.us/GetAmazonFRESH 👟 GET a PERSONAL SHOPPER - TRY BEFORE YOU BUY here ➡️ https://geni.us/GetPERSONALSHOPPER 👕 GET the PERFECT FIT - TRY BEFORE YOU BUY here ➡️ https://geni.us/GetPERFECTFIT 💳 GET SHOP DEALS & SNAP eligible groceries here ➡️ https://geni.us/GetSNAPeligible --------------------------------------------------------------------------------------------------------------------------- 🌐 Visit our site and discover our selection of unique, unofficial, or fun merch (t-shirts, outerwear, headwear, accessories, etc.). Or you can request custom merchandise for your crafting wear at: https://weprintforlife.com/custom-order/ --------------------------------------------------------------------------------------------------------------------------- ⓘ Disclosure: This Channel participates in the Associate's Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to eCommerce sites. All logos and product images are copyrighted to the original manufacturer. Your support helps keep the Channel running!