Blip: Nordic nRF52840 Dev Board with Sensors and Debugger скачать в хорошем качестве

Blip: Nordic nRF52840 Dev Board with Sensors and Debugger

Back this project: https://www.crowdsupply.com/electronu... Get an Arduino https://amzn.to/37eNJ4e Back this project: https://www.crowdsupply.com/electronu... Blip is a development board for Bluetooth Low Energy (BLE) and 802.15.4-based wireless applications, built around the Nordic Semiconductor nRF52840 SoC. Built-in Tools for Versatile DevelopmentBlip has a Black Magic Probe compatible programmer and debugger built in, along with a temperature/humidity sensor, ambient light intensity sensor, and a three-axis accelerometer. It can be used to prototype very low power devices. It also has provisions for a microSD card slot, which makes it a complete and versatile development board. Blip supports Nordic Semiconductor nRF5 SDK, Zephyr RTOS, Arduino and CircuitPython, so users can easily find resources to interface it with pretty much any hardware. There’s even an Android/iOS App and a Bluetooth web interface. Features Controller: Raytac MDBT50Q-1M module based on Nordic Semiconductor's nRF52840 module with FCC/TELEC/CE certification Accelerometer: LIS2DH12 high-performance three-axis "femto" accelerometer Ambient Light Sensor: LTR-329ALS-01 Humidity and Temperature Sensor: Si7006-A20 Debugger: STM32F103CBT6 as Black Magic Probe debugger (can be used to debug external chips also) NFC Antenna MicroSD slot GPIO: 28 pins on header Power Supply: USB, JST connector for Li-Ion/Li-Po Battery Management BQ24079 battery charging and power management IC nRF52840 Features 32-bit ARM® Cortex™-M4 CPU with floating point unit running at 64 MHz 1 MB flash, 256 KB RAM Bluetooth 5 multi-protocol radio, with 802.15.4 support for Thread and Zigbee Full speed USB QSPI/SPI/TWI/I²S/PDM/QDEC 32 MHz SPI 12-bit 200 ksps ADC Operating ConditionsMaximum Input Voltage USB powered : 5 V Vext = 1.8V to 3.3 V Vbat = Lithium ion/polymer 3.7/4.2 V battery Power Ratings Max battery charging current : 150 mA When powering with Vext, the debugger, charging IC, and LDO are all bypassed for low current consumption and for current measurement. Available Shields: E-paper and GamingThere are two shields available for Blip, the Blip E-paper Shield and the Blipboy Gaming Shield. E-paper Shield This shield can be plugged into Blip to convert it into a low-power display device. Model: GDEW0154Z04 Resolution: 200 X 200 Screen size: 1.54 inch; active area: 27.6 mm X 27.6 mm Schematic: https://docs.electronut.in/blip/shiel... Documentation: https://docs.electronut.in/blip/shiel... Blipboy Gaming Shield This shield can be plugged into Blip to convert it into a handheld gaming device! Blip with the Blipboy shield can support CircuitPython, Arduino, Zephyr, etc. You can play (and make) games in Python for this. We already have one sample running and are working on more to come. Schematic: https://docs.electronut.in/blip/shiel... ⚠ If there are any copyright issues please contact us. We will remove the video. Thanks. #crowdsupply #kickstarter #technology #kickbooster #indiegogo #newinventions #creative #gadgets #newinventions2021technology #campaign #advertisement #kickstarterproducts #kickstarter2021 #kickstarterprojects #wefunder