UNBOXING 3.0m GLIDER • Django22 L [30] RTF by SANSIBEAR 🐻 • (English/Français 4K) скачать в хорошем качестве

UNBOXING 3.0m GLIDER • Django22 L [30] RTF by SANSIBEAR 🐻 • (English/Français 4K)

#notsponsored Get yours at https://sansibear.de/product/django22... 🇺🇸 Hi folks 👋🏻🤠 Thank you for watching this video and don't forget to subscribe so you don't miss anything (it's free but it helps content creators a lot) 🙏🏻🥰 If you want to help me to expand my squadron 😜 or buy a specific plane to review, you can help me by making a small donation via my PayPal link https://www.paypal.me/arthurjanin?loc... Thank you very much in advance my friends 🤩🙏🏻 🇫🇷 Salut les copains 👋🏻🤠 Merci d’avoir regardé cette vidéo et n’oubliez pas de vous abonner pour ne rien manquer (c’est gratuit et pourtant ça aide énormément les créateurs de contenus) 🙏🏻🥰 Si vous voulez m’aider à agrandir mon escadron 😜 ou que j’achète un avion en particulier, vous pouvez m’aider en faisant un petit don via mon lien PayPal https://www.paypal.me/arthurjanin?loc... Merci beaucoup beaucoup d’avance les amis 🤩🙏🏻 📸 Follow me on Instagram :   / arthuraerorc   ⏰ TikTok : https://vm.tiktok.com/ZMNYCqUhC/ You can buy my things here ⬇️ 🎮 Jeti Rx and DS16 ➡️ https://www.opale-paramodels.com/fr/ ‪@OpaleParamodels‬ 🔋CNHL LiPo ➡️ https://chinahobbyline.com ✈️ Jets and more ➡️ https://www.turbines-rc.com/fr/?aff=4 🌪️🍊 Django22 L [30] Elektro (RTF version) by SANSIBEAR 🐻 https://sansibear.de/product/django22... Tail servos : 2 x KST HS08B Wing servos : 4 x KST HS08A Fuselage : Cockpit and tail CFC (carbon) Canopy Rx friendly for antenna 1 and plastic tail servos hatch (bottom fuse) for the 2nd antenna ! Wings : XPS Sandwich Carbon/Glass X-over Motor : Aeronaut actro-n 28-4-880 with ESC Aeronaut actrocon 30A Spinner : Aeronaut Z-spinner 38mm Prop : CAM-Z 12x6 Wingspan (envergure) : 3000 mm Length (longueur) : 1440 mm Weight PNP (without Rx, LiPo) : 844gr Weight RTF CG 80.2 mm with LiPo 3S 1100mAh 30C 77g + 1,27g lead in rear fuselage pipe + Muli6s sensor + Mvario2 : 947gr ⚖️ Parts : Wingspar + elevator screws : 21gr Right wing (with 2 KST servos) : 242gr Left wing (with 2 KST servos) :239gr Horizontal stab : 20gr Fuselage, rudder and motor (without Rx) : 322gr Surface : 55.7 dm² Wing load (Charge alaire) : 17 g/dm2 (CG 80.2mm) 📏 Settings : Ailerons : 9mm down / 13mm up Elevator : 6mm (thermal and normal) / 12mm (speed mode) Rudder : 17mm Flaps offset : Speed 2mm up / normal 0 / thermal 3mm down Ailerons offset : Speed 2mm up / normal 0 / thermal 3mm down Elevator offset : Speed 1mm down / normal 0 / thermal 0 Snap flaps : 2mm down flaps only Thermal Flaps camber : 2mm/4mm max Brakes (Freins) : Flaps 90° / ailerons 10mm up / elevator compensation 5mm down Launch in speed mode (1mm down elevator) with a Preset (like in F3K) : 1mm down elevator (on a momentary switch) ❌ Book CG : 80.2mm (LiPo 3S 1100mAh 30C 77gr, all the way back + 1.27g lead in rear fuselage pipe) Max limit average wind 20 km/h (12.3 mph), I won’t fly with more wind 😕 Flights : Maiden (filmed) : 0:00 Presentation 0:41 OPENING 0:58 Bag 1:11 Wings covers 1:49 Left wing (239g) 3:37 Horizontal stab (20g) 4:30 Fuselage (322g) 6:33 Rudder 7:40 ⚖️ Let's see the weights... 8:52 Flap / aileron connection 😍 9:28 Wingspar + elevator screws : 21gr 9:40 Total : 844g (no liPo, no Rx) 10:42 This is it 🌧️ 11:15 Please Subscribe 🙏🏻😍 11:34 CG (LiPo placement) Photos #glider #rcplane #django #sansibear #f5j #f3k #f3j #jeti #radiocontrol #setup #modellbau #django22 #new #perfect #unboxing #assembly