У нас вы можете посмотреть бесплатно Make waterfall fountain at home from plastic bottles или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
Make waterfall fountain at home from plastic bottles. Making a simple waterfall fountain at home using three plastic bottles is a fun and creative DIY project! Here’s a step-by-step guide to help you create a basic waterfall fountain Materials You'll Need: 1. 3 plastic bottles (preferably different sizes) 2. Hot glue gun or strong adhesive 3. Plastic tubing (like aquarium tubing or flexible plastic pipe) 4. Water pump (a small submersible pump will work best) 5. A container for the base (to hold the water, like a shallow plastic bin or large bowl) 6. Scissors or a utility knife 7. Decorative stones, pebbles, or small plants (optional, for aesthetics) 8. Electrical tape (optional, for securing tubing) Steps: 1. Prepare the Bottles Cut the Bottles: Start by cutting the tops of the plastic bottles to create openings where the water will flow. You can leave the bottom part of the bottles intact. The smallest bottle will be the top waterfall section, the middle-sized bottle will hold the water and pump, and the largest bottle will collect and store the water. 2. Drill Holes in the Bottles Drill or carefully cut holes in the side of the bottles to allow the water to flow from one bottle to the next. For example, the middle bottle should have a hole near the top where water can flow in from the smallest bottle, and the largest bottle should have a hole where the water will pour out and cycle back. 3. Connect the Bottles Arrange the Bottles: Stack the bottles with the smallest on top, the medium bottle in the middle, and the largest at the bottom. Glue the Bottles Together: Use a hot glue gun or strong adhesive to attach the bottles together in a stable position. Make sure they are securely attached so there are no gaps for the water to leak out. Seal the Holes: If you notice any gaps or areas where water might leak, seal the edges of the holes with waterproof sealant. 4. Install the Water Pump Place the submersible pump at the bottom of the largest bottle or in the container that will act as the water reservoir. Make sure the pump is fully submerged in water. Attach the Tubing: Connect the tubing from the pump to the top bottle (smallest one). This tubing will carry the water from the pump to the top bottle. Ensure that the tubing fits snugly and is secured with waterproof tape or adhesive. 5. Final Assembly Place the Tubing: Position the tubing so that it allows water to flow from the smallest bottle to the next bottle in line. Decorate the Fountain: Add decorative stones or pebbles around the bottles or place plants in between for added aesthetic appeal. 6. Fill with Water and Test Fill the bottom container with water, ensuring it’s enough for the pump to function properly. Plug in the pump to start the flow of water. The water should travel from the bottom bottle, up to the second bottle, and cascade down to the largest bottle, continuing in a loop.