(18) Check The Torsional Irregularity- Tall Buildings Design - Etabs скачать в хорошем качестве

(18) Check The Torsional Irregularity- Tall Buildings Design - Etabs

Torsional irregularity is one such horizontal irregularity which has to be looked upon while designing a structure. Before explaining the term torsional irregularity, one has to be acquainted with the terms drift, story drift, eccentricity and torsion. Recent codes have defined torsional irregularity as the condition where the maximum story drift, including accidental torsion, at one end of the structure transverse to an axis is more than 1.2 times the average of the story drifts at the two ends of the structure. Excel File link : https://drive.google.com/file/d/14_tr... All Parts:    • ETABS: 20 Story Building Design   Part 01:    • (01) Designing a 20 story building - Tall ...   Part 02:    • (02) Strat new project and material proper...   Part 03:    • (03) Define Section Properties- Tall Build...   Part 04:    • (04) prepare the DXF file in AutoCad- Tall...   Part 05:    • (05) Import the DXF file in ETABS- Tall Bu...   Part 06:    • (06) Define the load patterns- Tall Buildi...   Part 07:    • (07)  Define The Mass Source- Tall Buildin...   Part 08:    • (08)  Define The Load Combinations- Tall B...   Part 09:    • (09)  Assign Loads- Tall Buildings Design ...   Part 10:    • (10).  Automatically Meshing- Tall Buildin...   Part 11:    • (11)  Assign Pier Labels or Spandrel- Tall...   Part 12:    • (12)  Assign The Frame Section- Tall Build...   Part 13:    • (13).  Assign Diaphragm and Run the Analys...   Part 14:    • (14)   Check The P-Delta effect- Tall Buil...   Part 15:    • (15).  Check The Eccentricity- Tall Buildi...   Part 16:    • (16)  Check The Soft Story Irregularity- T...   Part 17:    • (17)  Check The Heavy Story Irregularity- ...   Part 18:    • (18)  Check The Torsional Irregularity- Ta...   Part 19:    • (19)  Check The Story Drifts- Tall Buildin...   Part 20:    • (20).  Modal Analysis (Dynamic Analysis)- ...   Part 21:    • (21).  Response Spectrum - Tall Buildings ...   Part 22:    • (22). Check Spectrum Irregularity & drift ...   Part 23:    • (23). Design Core Walls using Uniform Rein...   Part 24:    • (24).  Design Shear Walls using General Re...   Part 25:    • (25).  Design Columns and Beams - Etabs- T...