Fixing the Gardner Diesel of a 102-Year-Old Classic Boat! скачать в хорошем качестве

Fixing the Gardner Diesel of a 102-Year-Old Classic Boat!

Subscribe to this channel and consider becoming a Patreon:   / argonautii   Contributions will go towards the repairs, restoration, and documentation of Argonaut's rich history, along with the preservation of traditional boat building and maritime heritage through video creation. This winter, I worked to repair the air start manifold on my vintage 1940 Gardner 6L3 Marine Diesel Engine. Over the course of my summer cruise, I experienced repeated failures of several of the gaskets on the air start system, as well as repeated seizing up of the intake valves due to scratched valves that lead to the leaking of exhaust gases, causing the valves to seize up. I was able to pull the valves and clean them, as well as replace gaskets with oiled cardboard, but both solutions kept failing. In this video, I go over how I was able to finally fix the problems properly by replacing the gaskets with proper gasket material, and then lapping the valves into their valve seats. Steps for the start sequence: 1. Turn on gauges and voltage regulator 2. Turn on diesel fuel cutoff to the engine 3. Set the governor switch 4. Set the throttle to a start idle 5. Set the transmission to neutral 6. Turn on the shaft oilers, check the drip rate 7. Turn on the air system (large valve at the air battery tank) 8. Decompress each of the six cylinders 9. Line up the engine flywheel to top dead center on one of the aft 3 cylinders (called "barring" the engine, indicated by tick marks on the flywheel) 10. Compress the aft three "start" cylinders 11. Open the air start manifold valve, which pressurizes the air start system 12. Open the engine start valve lever, which allows air to pass into the start manifold and aft three cylinders to build momentum in the flywheel 13. Compress each of the forward three cylinders (in sequence with the rotation of the flywheel) 14. Shut off air manifold valve 15. Turn on engine alarms (low oil pressure) 16. Open the air start manifold pressure release valve Please subscribe/provide feedback on the video in the comments. I'm interested in showing more boat projects, Argonaut's history, and different aspects of the boat and welcome any input that you have. Follow Argonaut's Adventures and Restoration: Patreon:   / argonautii   Instagram: mv_argonaut@ TikTok: mv_argonaut@ https://www.argonaut1922.com