4 Incastro del manico parte quarta скачать в хорошем качестве

4 Incastro del manico parte quarta

Ultima finitura dell'incastro del manico di violino prima dell'incollaggio ENGLISH TRANSLATION OF THE WRITTEN NOTES IN THE VIDEO, IN ORDER OF APPEARANCE 00:05 Fitting the neck into the body - Part Four 00:10 - After finishing neck and heel you must refine the mortise, which will be a little swollen due to saturation with the glue 00:15 - Restore the right degree of forcing of the joint, that will close well with firm pressure of hands 00:24 - Due to the swelling of the block, the heel is too far from the button and should be forced excessively 00:32 - Use sandpaper files to smooth surfaces roughened by the glue 00:55 - Still too forced (too tight) 01:04 - Put chalk only on the sides of the heel 01:13 - Insert it carefully to mark the points of contact 01:23 - With the help of the chalk marks refine the sides of the mortise, restoring the right grade of forcing of the heel 01:42 - Using a scraper (no sandpaper) smooth the surface of the button, roughened by glue, being careful not to alter the flatness 01:53 - Put chalk on it to evaluate the contact with the base of the heel, refining the latter if necessary 02:12 - Clean up carefully the chalk residues 02:31 - Make a final test to assess that the forcing is correct 02:46 - One last check of all the measures, to verify that everything is back in place 03:15 - Check that the angle of the strings at the bridge is correct (about 157°) using a goniometer specially designed 03:31 - Now you just have to warm the glue and do the gluing of the neck Indice dei video : http://davidesora.altervista.org/videos/ Website : http://www.davidesora.it/