How to remove test and replace a BMW Z4 Soft Top Motor COMPLETE HD скачать в хорошем качестве

How to remove test and replace a BMW Z4 Soft Top Motor COMPLETE HD

**IMPORTANT UPDATE***: "At around 18 minutes when screwing in the hydraulic line bolts back into the motor, tighten these two bolts up to manufacturers specifications (I just firmly tightened mine until it would not go any more). The "hole" in the bolt does not have to line up with the hydraulic line. If yours is like mine, it will line up anyway. I say this because make sure you do not sacrifice tightening the bolt into order to line up the hole or you may result in a leak because, of course, hydraulic lines are under a lot of pressure. Check for leaks as you should when testing the motor before reinstalling your roof. I say this for preventative reasons brought up to me by a viewer, myself nor others using this video have had this issue occur if the bolt is firmly tightened. Fluid should flow whether or not the hole lines up.** In this video I go into detail on how to remove, test, and replace the soft top motor with complete details. I suggest you watch the video in its entirety before attempting yourself. The entire process takes about 2 to 4 hours. You only need a helping hand when physically removing and placing the top. It is a rather simple process and I make it very straight forward in this video! I hope it helps! I looked around everywhere for a video but nothing is out there besides manual instructions. Do me a favor and give me a thumbs up if you appreciated my time! Have anything to add? Leave it in the comment section below for others to see! Thanks!