Felder Format4 Profil 45 raised panel profile скачать в хорошем качестве

Felder Format4 Profil 45 raised panel profile

Felder Format 4 Profil 45 using 220MM diameter steel tooling on a 30MM spindle cutting red oak .4" thick door raised panel with 5.5MM thick edge to fit into a groove in the door rails and styles. 6000 rpm clockwise spin. This particular tooling has two edged carbide knives and cuts ogee one side or low profile t'other. These cuts are .25" depth and 60MM from edge inland. Three passes required on most woods for best results in cross grain or with grain. Having the fence left and right sides parallel is critical to an even straight line cut along the top 4 side edges of the panel. Power feeding would probably not yield as smooth a cut on certain woods with pronounced grain. Passing the tool over each cut several times smooths the wood grain and saves on sanding. These knives are cutting for the first time after installing the second cutting edge in position. There are two knives on each side of the tooling.