Instron® 2712-04x Series Pneumatic Side Action Grips | Unboxed and Installed скачать в хорошем качестве

Instron® 2712-04x Series Pneumatic Side Action Grips | Unboxed and Installed

Welcome to Unboxed and Installed, an Instron® series where we break down what comes in your accessory boxes and guide you through proper installation on your testing system. In this video, we’re looking at the Instron 2712-04x Series Pneumatic Side Action Grips. Whether you’re new to your testing system or simply need installation guidance, this video walks you through everything included in the box and demonstrates the correct procedure for installing the grips on your Instron universal testing machine. About the 2712-04x Series Pneumatic Side Action Grips: Instron’s 2712-04x Series pneumatic side action grips offer a versatile gripping solution for a wide range of materials including plastics, metals, textiles, paper, thin sheet, foil, and wire. The gripping force is controlled by adjusting the inlet air pressure and remains constant even if the specimen thickness changes significantly during the test. The quick and easy operation of the grips improves productivity and usability compared to other types of gripping techniques. A pneumatic cylinder in the grip body actuates dual-lever arms that move the jaw faces together symmetrically in a self-centering action to clamp the specimen. These grips have an adjustable jaw face opening, allowing you to minimize the opening to the thickness of the specimen to further reduce the risk of pinching. The 5 and 10 kN models feature adjustable jaw face offset for irregular specimens, such as lap-shear or components. Application Range: • Static tensile tests on a wide range of materials and specimen types including plastics, metals, textiles, paper, thin sheet, foil, and wire. • Type of loading: Tensile, static and tension-tension cyclic tests. Not suitable for high-cycle dynamic fatigue tests. • Specimen shapes: Round (wires) and flat specimens with or without shoulder. Learn More: https://www.instron.com/en/products/t... Discover more testing accessories: https://www.instron.com/en/products/t... 0:02 Intro 0:10 2712-04x Series Pneumatic Side Action Grips 0:15 What's in the box 0:24 Step 1. Insert the grip assembly into the clevis socket and install clevis pin 0:32 Step 2. Secure the clevis pin in position with the clevis pin clip 0:39 Step 3. Tighten the locknut by hand or optionally secure it with a tommy bar 0:47 Step 4. Repeat the process for the top grip 0:55 Step 5. Push the jaw faces into the grip body until you feel them locate in the socket 1:09 Step 6. Install the jaw face shields using the M4 thumbscrews in the accessory mounting holes 1:18 Step 7. Connect air lines by pushing the coupling firmly onto the nozzle until fully engaged 1:27 SUCCESS: Your pneumatic grips are now ready for testing