Replace 2006 4Runner Steering Wheel Airbag and Clock spring 4th Gen скачать в хорошем качестве

Replace 2006 4Runner Steering Wheel Airbag and Clock spring 4th Gen

   • Replace 2006 4Runner Driver Seatbelt and A...   In this video I will be replacing a steering wheel, steering wheel airbag, and clock spring in my 2006 4Runner 4th Generation. This does requires a couple of tools including: Socket wrench with 19 socket Flat head screw driver Phillips screw driver T-30 Star Bit Remember to unplug your battery before getting started. I purchased all of the parts from a salvage yard on a 2009 4Runner. Everything matched up fine and worked correctly. This job was very simple to do however if you are not confident in doing this procedure it is always best to take it to a professional especially when dealing with any SRS components. When replacing the clock spring make sure to follow these steps: 1. Turn the clock spring counter clockwise (rotate to the left) until you feel tension. 2. Turn the clock spring 5 rotations in the opposite direction (clockwise). You should feel tension. 3. Turn clock spring back counter clockwise 2.5 turns. 4. Top sticker should be upright in correct position and the orange marker should be on bottom left. I uploaded a follow up video where I replaced the driver side seatbelt and airbag sensor. Check it out here:    • Replace 2006 4Runner Driver Seatbelt and A...   #4runner #4thgen #airbag #howto #airbags #steeringwheel #srs #toyota #toyota4runner #mechanical #trucks #cars