Скачать с ютуб OpenWRT - Intel N5105 2.5GbE I225-V - Build Custom Firmware & Throughput Test в хорошем качестве

OpenWRT - Intel N5105 2.5GbE I225-V - Build Custom Firmware & Throughput Test

The Intel N5105 Router PC comes with 4 x 2.5GbE network ports. It is using the Intel I225-V controller and the kmod-igc driver package is not included in OpenWRT x86 firmware. In this video, I will show you how to build OpenWRT firmware with custom installed packages, such as luci, luci-ssl and kmog-igc to add the driver to the firmware. Because the Router PC only supports UEFI boot, I have to use COMBINED-EFI (SQUASHFS) image to write to the USB drive. We will also test out the router WAN to LAN throughput with iperf3, OpenSpeedTest and observe the power consumption during idle and load. Video timeframe: 00:00 - Intel N5105 2.5GbE Router PC Intro 00:37 - How to compile/build OpenWRT firmware 01:14 - Build x86/64 OpenWRT firmware with kmog-igc and luci using firmware-selector 03:46 - Write the OpenWRT firmware to USB drive with Rufus 04:26 - Install OpenWRT on something else? (SATA SSD/NVme) 05:11 - Connect Ethernet cables & Connection Overview 05:57 - Access BIOS and Boot up the Router PC with OpenWRT 07:11 - Access LuCI and Initial Configuration 09:25 - LAN throughput test with iperf3 10:10 - WAN & LAN 2.5GbE Setup 11:33 - WAN to LAN throughput - OpenSpeedTest - No Offloading 11:16 - WAN to LAN throughput - OpenSpeedTest - Power Consumption 13:21 - WAN to LAN throughput - iperf3 - No Offloading 15:05 - OpenSpeedTest with SW Offloading and Power Consumption 15:05 - iperf3 with SW Offloading and Power Consumption You can download my OpenWRT x86/64 build with kmog-igc (Intel I225-V 2.5GbE driver) and luci package here https://sysupgrade.openwrt.org/store/... If you enjoy my work, you can support me at   / vantechcorner   Thanks for watching and see you in the next video!