ABS Anti-Snap locks are fitted by the Neighbourhood Watch. скачать в хорошем качестве

ABS Anti-Snap locks are fitted by the Neighbourhood Watch.

We made this video for Avocet to show how to easily fit their product. http://www.clockworkeye.co.uk Transcript: The fitting of the Avocet ABS diamond rated lock is a simple and straightforward process. But before we show you that process let me show you how to get the right size lock for your door. The two measurements required to ensure that you get the correct lock for your door are the internal an external measurements. First locate the securing screw that holds the lock in place. This is located in the centre of the door frame in line with the lock. If in doubt remove the existing cylinderand measure. Using in the millimeter scale on your tape or ruler take the internal measurement. This is taken from the centre of the securing screw to the outer edge of the handle backplate. Secondly take the external measurement, this is also taken from the center of the securing screw to the outer edge of the handle backplate. It is recommended the lock protrude no more than three millimeters from the handle backplate. If you haven't already purchased your ABS Diamond Grade cylinder lock then you can find your nearest ABS elite locksmith by simply visiting our website and choose one of our suppliers the link below will take you straight there. Once you have purchased your ABS Diamond Grade cylinder lock you will notice that there are four components to the product: The lock itself; an assortment securing screws; a set of three keys; and the registration card. For now if you can put the card somewhere safe and we'llcome back to this later. To remove the old lock locate the screw that we measured from the beginning of this video and using a suitable screwdriver remove it. Then insert the key and turn it to a five to the hour position while pulling gently. Remove the old lock. Before fitting your new ABS lock it might help to loosen the handle back plate. You'll notice that the letters EXT are engraved on the side of the lock. This indicates the external part of the lock when fitted in the door. Insert the key into the side at the locking engraved EXT with the key slightly turned so the cam is flush with the body of the lock push the lock into the door and gently maneuver in to place. Insert the securing screw and tighten. And most importantly test the lock functions. Now as you can see really is that easy isn't it Maureen? Yes it is. And the last thing to do is register your key code with ABS Secure. To do this simply go to our website ABS-secure.co.uk and click the register keys button or call 01484 725 601 Registering gives you the opportunity to retrieve your key code details at a later date should you lose your card. Registering also allows you to password-protect key cutting of your keys To find out more information please feel free to browse our website ABS, security locked in, intruders, locked out!