Expansion Joints for Roofs | EMSEAL RoofJoint Watertight Expansion Joint and Transitions скачать в хорошем качестве

Expansion Joints for Roofs | EMSEAL RoofJoint Watertight Expansion Joint and Transitions

RoofJoint(https://www.emseal.com/product/roofjo...) is a watertight roof expansion joint from Sika Emseal. It provides a watertight seal for expansion gaps on the roof and also transitioning to walls. It's a patented dual-seal, double-flanged, extruded thermoplastic rubber system for sealing expansion joints in roofs, plaza assemblies, green and vegetative roofs. Watertightness is achieved through positive integration with the roofing membrane and a purpose-designed system for transitioning between the joint in the roof and joints in walls. Movement at the joint is accommodated by the folding design of the gland. The double-cell configuration provides two levels of sealing. The geometric shape is purpose-designed for the lowest strain during movement to ensure longevity. In addition to roof applications, RoofJoint can be effectively used for softscape plazas as well as split slab and hardscaped decks when drainage or other construction may be impeded by the expansion joint protruding above the structural deck elevation. In these cases an additional expansion joint seal would be needed at the wearing course. (See Emseal’s SJS, DSM and DSM-DS.) As with roof applications where a fire-rated seal is also required, Emshield DFR can be installed directly below the RoofJoint. Product information at: https://www.emseal.com/product/roofjo... SJS: https://www.emseal.com/product/sjs-se... DSM: https://www.emseal.com/product/dsm-sy... Emshield DFR: https://www.emseal.com/product/dfr2-f... Seismic Colorseal: https://www.emseal.com/product/seismi... Transitions: https://www.emseal.com/product/watert... Features High movement Redundant sealing Double-level roof-membrane integration flanges Redundant fastening—adhesion or welding & termination bar Factory heat welded transitions at tees, crosses, roof-to-wall, etc. Watertight transition to Seismic Colorseal wall joints using RoofJoint Closures Uniquely addresses wall joint to roof joint interface UV-stable NPVC version available for welding compatibility with PVC membranes, as well as for adhering into asphaltic, SBS, mod-bit, or thermoset rubber roof membranes White TPV version available for direct welding into TPO reflective roof membranes Can be fire-rated with installation of Emshield DFR System includes necessary termination bar and fasteners required for installation. Sizes RJ-0200: 2-3 inches | 50-75mm RJ-0400: 3-5 inches | 75-125mm RJ-0600: 5-7 inches | 125-175mm RJ-0800: 7-9 inches | 175-225mm Movement RJ-0200: 2 1/2 inches | 60mm RJ-0400: 5 inches | 125mm RJ-0600: 7 inches | 175mm RJ-0800: 9 inches | 225mm Uses Flat roofs Sloped roofs Green, garden, vegetative roofs Plaza deck and split-slab assemblies Roof to wall joint transitions https://www.emseal.com/product/watert... Tie in to hot rubber roofs Weld to PVC roofs Adhere to mod-bit roofs Adhere to torch-applied roofs Weld to TPO roofs Non-roof applications in split slab and hardscaped decks U.S. Patents US Patent: 10,851,542 US Patent: 9,850,662 US Patent: 9,739,050 US Patent: 9,322,163