MXE2000 | Get to know the NEW Waring Ellipse Blender скачать в хорошем качестве

MXE2000 | Get to know the NEW Waring Ellipse Blender

The Ellipse™ drive offers two control modes: In manual mode, you can easily operate the drive by pressing one of the buttons located on the top, with each button corresponding to a specific duration in seconds to control the drive’s operation. The second is in automatic mode. Automatic mode is activated by pressing the AUTO START button for three seconds. Once activated, the LED light will blink. When the drive is in place and the sound enclosure is closed, the drive will automatically run for 30 seconds unless interrupted by opening the sound enclosure. The Ellipse™ docking station is a hollow base designed to store the Ellipse™ drive between blends for easy access. The docking station can be placed in any direction under the base for user-convenience. To ensure peak performance of your Ellipse™ drive, it is important to regularly clean and maintain it. Please use a soft, damp cloth to clean the drive and avoid abrasive materials. Do not submerge the drive in water. Charge your Ellipse™ drive in under 2 hours with a rapid charging system. Plug in the drive at the end of the day so you’re powered up and ready for your next service day! Place the Ellipse™ drive on the charger and it will display the battery power level. A blinking red light indicates your battery is running low, typically between 1% and 25%. A blinking orange light indicates your battery is running low to medium, between 26% and 75%. A blinking green light indicates your battery is almost charged, between 76% and 99%. A solid green light means that your drive is fully charged and ready to go! Check your battery level at any time by placing your drive on the charger. If you need to power up multiple drives in a busy operation, you can also purchase a triple charger sold separately.