Changing a screen/fixing blank screen for nikon coolpix L22 camera tutorial скачать в хорошем качестве

Changing a screen/fixing blank screen for nikon coolpix L22 camera tutorial

If my words are stupid, the walkthrough is here in TEH DESCRIPTION HERP DERP This is a tutorial to help change the screen on a nikon coolpix L22 camera. I had a blank screen problem, where the screen was just showing white, because the data was failing to travel along the cable properly, because I derped and shoved the screen in willynilly. so I straightened that out and it worked. If yours is doing that, check all the contacts, then check the wire to see if its broked. WALK THROUGH There are seven black screws you need to remove to get inside the casing. two on either side and three on the bottom. When they are removed, open teh battery compartment and run a fingernail or something between the edges to unclip teh clips. Flip the screen carefully over, so that the metal is exposed underneath. There are 4 smaller silver screws holding the metal thing in place (three under black sticky things). Carefully maneuver the metal plate away. There is a creamwhite clip thing holding the cable wire in place, with all the connections connected. (I broked it. it unimport). You can now remove/replace the screen. If you are replacing the screen with a brand shiny new one, remember to fold along the white lines to make sure that the cable is flat under the metal plate. Then just do it all backwards to reconstruct it. TL:DR watch the vid... awwwww look at younger me try to be all clever... is so cute! :3