Ceramic Nano Coating on GRAND VITARA скачать в хорошем качестве

Ceramic Nano Coating on GRAND VITARA

recently one month old grand vitara car comes for ceramic coating at vaahan e-services centre; All the member of team have done very well , results are very good, here we used turtle wax ceramic coat and meguiar's polish, 1stly we remove all the swirls, then futher we preceeded all the process. ‪@MarutiSuzukiCorp‬ ‪@Brotomotiv‬ . Step 1: The Prep Work We can’t stress this enough. Applying a ceramic coating, wax, sealant, or even PPF starts at the Prep Work stage. As a general understanding, prep work includes: Washing the vehicle thoroughly to remove dirt, debris, and any other surface contaminants. Using clay bar, clay mitt or clay towel to remove contaminants that are stuck on the paint. Paint correction & polishing: One of the biggest myths about ceramic coatings is that it improves the paint surface by removing swirls, scratches, or faded paint. That is a completely false statement. Ceramic coatings are paint protectants, meaning they protect the existing paint surface. If the paint is full of scratches & swirls, a ceramic coating will actually amplify or magnify them. Hence, it is always recommended to do paint correction before applying ceramic coating. If you want to know more about paint correction, this article will shed some light on it. Step 2: Nano based IPA cleaning IPA stands for Isopropyl alcohol. It is an effective solution to wipe all polishing oil and chemicals from the car’s body. It is not the usual IPA found in medical stores; it is a special nano-based IPA solvent with a degreaser. Since ceramic coatings are based on nanotechnology, nano-based IPA cleaners should be used which will help in removing all polishing oils for effective bonding of the ceramic coating. Step 3: Application area and conditions Once the prep work and pre-wipe cleaning are done, you can start applying the ceramic product. However, before proceeding certain application area and conditions must be discussed. First of all, ceramic coating MUST be applied in a dust free bay. If even a small amount of dirt sticks to the paint while you are applying ceramic coating, it will bind in with the coat. Secondly, the ideal temperature should be around 21- 28 degrees centigrade, and the humidity below 50 %. Also, ensure to buy ceramic coating products India of the top quality to receive quality and long-lasting results. Step 4: Applying a Ceramic Coating Let’s come to the actual application. Follow these steps: Shake the bottle well before use. Wrap the suede cloth around applicator sponge. Pour a few drops on the sponge. Spread the coating across the paint in a 2ft X 2ft area. Make sure you don’t leave out any area so apply in a criss-cross pattern (first apply horizontally, then apply vertically) Wait for 30 to 60 seconds (depends upon temperature) until you start seeing bubbles. Gently remove the excess and level up the surface using a microfiber. Use a separate microfiber and buff to shine. Tips: Go section by section, inspecting each section of the vehicle. Use separate microfiber towels for leveling and buffing. And, keep flipping the microfibers over different sides as you go along the vehicle. Now that you have applied the ceramic coating, let the vehicle sit indoors for a few hours. It is important to avoid exposure to water and chemicals for a few days. The ceramic coating undergoes a process of crystallization. Once fully cured, it provides amazing features like hydrophobicity, shine & luster, and protects against UV rays, colour fading, and other environmental hazards.