3D Printing LYNX GBB Airsoft tutorial [Check Description] скачать в хорошем качестве

3D Printing LYNX GBB Airsoft tutorial [Check Description]

The current file is unavailable. There are no Spring and Screws names in the video, so please refer to this description. Required tools - • Wire cutter, Screwdriver, Pliers,Tweezer, Hex key set (metric) Screws - • M1.7x6 [Phillips round head screw] X4 • M2x12 [cross countersunk head screw] X1 • M3x12 [Socket countersunk head screw] X6 • M3x8 [Socket countersunk head screw] X2 • M3x5 [Socket set screw] X1 • M4x35 [Socket button head screw]+M4 Hex Nut X1 • M5x15 [Socket countersunk head screw] X1 • M8x16 [Socket head Cap screw] X1 Springs - WDxODxL • 0.5x6x30 [Compression Spring] X1 • 0.5x6x50 [Compression Spring] X1 • 0.5x8x400 [Compression Spring] X1 • 0.6x5x10 [Torsion Springs] X1 (If the sizes are roughly the same, that's fine.) • 1.2x33x500 [Compression Spring] X1 (It's hard to find a stock spring, so I recommend using a Custom spring manufacturer. It's best to make a custom-made spring, but it's actually okay to use it by widening the inner diameter of the m4 gbb buffer spring. ) • VSR-10 main spring X1 • G series GBB Nozzle valve spring X1 • OD 4mm Ballpoint pen spring X1 Spring wires - • 1.2mm&0.4mm [Spring wire] • 3mm&5mm [AL craft wire] (But you can replace it with the printing pins in the file.) • 2.0mm [Spring wire] (This can also be replaced with a printing spring.) Etc. - • GBB hopup bucking & inner set X1 • AN014 O ring d1=12.42 d2=1.78 X3 • 699-2RS 9x20x6 Bearing X1