Showing how the GMSK Micro Node is connected and getting it all working EASY. скачать в хорошем качестве

Showing how the GMSK Micro Node is connected and getting it all working EASY.

This Video should give you some idea how to connect the GMSK Micro Node up from your PC to the Micro Node then to your FM radio i.e. Kenwood TM-G707 with 9600bd packet mode and how it all work's, Hope this help..... Depending on the Radio used you might have to change the JUMPERS on the board to get the Cos light working for the receive Audio, most yaesu radios will work with the board out of the box but some PMR & Multimode radios might need the jumpers changing it's down to you to get the board working with your radio's. GMSKMICRONODE Jumper Switch Functions! 1-2 Function - SW1 Operating power is taken from the USB bus. 2-3 Function - SW1 Operating power is taken from the radio connector, and the USB bus power is disconnected. ------------------------------------- 1-2 Function - SW2 COS signal fed into transistor for positive COS signals. 2-3 Function - SW2 COS signal fed directly to PIC (negative COS signal.) ------------------------------------- 1-2 Function - SW3 COS signal fed directly to PIC (negative COS signal.) 2-3 Function - SW3 COS signal taken from transistor for positive COS signals