LoRa APRS TNC скачать в хорошем качестве

LoRa APRS TNC

Back on LoRa APRS this month. After rebuilding the "Ultimate LoRa APRS Tracker" and building the "Battery Powered LoRa APRS iGate", this time we're putting together a LoRa APRS TNC. With the latest (3.1) iGate/digipeater firmware from Ricardo Guzman, it's now possible to configure an MQTT server that will receive all incoming APRS messages. This opens up a lot of interesting opportunities, like triggering real world actions based on received APRS messages. I'll dive into that in a future video, but for today I'll be preparing and setting up the hardware for a LoRa APRS TNC. The TNC functionality will be available through both WiFi and (USB) serial. In addition it will able to fulfil the roles of iGate and/or digipeater. Combined with the already mentioned MQTT and the ability to log to a remote syslog-server, this is a quite capable device. 00:00 Introduction 00:43 Staying hydrated 00:52 Required parts 01:32 Attaching the SMA to N connector 06:30 Trying the SMA male to male converter 07:00 Mounting the LoRa module 07:52 Discovering my 1st mistake 08:14 Plan B for attaching to the antenna connector 08:55 Attaching the back and front panels 09:50 Attaching the rubber feet 10:35 Summing up and what's up in the next video Required parts Heltec LoRa 32 V3 LoRa module 3D-printed enclosure (link below) SMA-to-N panel connector SMA-male to SMA-male patch cable (10 cm) 4 M3x10 button head bolts 4 M3 nyloc nuts 4 M3 washers 3D-printed enclosure used in this video https://www.printables.com/model/7978... Building a Battery Powered LoRa APRS iGate | Heltec Wireless Stick Lite & Firmware 3.1    • Building a Battery Powered LoRa APRS iGate...   Ultimate LoRa APRS Tracker Upgrade | Heltec Wireless Tracker Build    • Ultimate LoRa APRS Tracker Upgrade | Helte...