Triple Neo Thermic Wings - Time Lapse Build скачать в хорошем качестве

Triple Neo Thermic Wings - Time Lapse Build

In this video I will show you a time lapse build of the Thermic Wings for the Aeronaut Triple Neo. In one of my previous videos I showed you the build of the Triple Neo with the Speed Wings. The Triple Neo can use three different types of wings with the same fuselage. In the Speed Wing configuration, it has already shown pretty good performance in thermals, which is why the desire for the Thermal Wings quickly arose in me. The construction of the Thermic Wings is quite similar to the Speed Wings but has a much larger wing span of 2580mm compared to 1810mm of the Speed Wing. The wings are build as a classic balsa rib construction. The quality of the kit is very good with a fine selection of balsa sheets and a high accuracy of the laser cut parts. As usual for this kind of kits you have some room for own modifications. For example I reinforced the trailing edges of the wings with a carbon roving. To have a more carefree handling of the wings during attaching and removing I added 44g glass fiber to the inside of the balsa sheeting in the area of the first rib field at the wing root. I strongly recommend closing the brass tube for the torsion rod as shown in the video. This prevents the torsion rod from sliding to one side which in the worst case could pull the rod completely out of the other wing. During flight this would definitely be a catastrophic failure. I really enjoyed the build and can recommend it for anyone who has some basic experience in balsa building. The good build instruction leaves almost no room for mistakes. Flight Video of the Triple Neo Thermic: Triple Neo Thermic - Flight Video    • Triple Neo Thermic - Flight Video   Link to my Time Lapse Build Video of the Triple Neo Speed (there you also see how to build the fuselage):    • Triple Neo Speed - Time Lapse Build   Link to my Flight Video of the Triple Neo Speed:    • Triple Neo Speed - Flight Video   Link to Aeronaut: https://aero-naut.de/ Link to Triple Neo Thermic: https://aero-naut.de/produkt/triple-n... Specs: Wingspan: 2580mm Length: 1200mm Wing area: 47 dm2 Weight (AUW): 1305 g (in my configuration incl. approx. 15g for a GPS Logger and 31g of balance weight to adjust the CG) RC functions: rudder, elevator, ailerons, brake, motor My configuration: Motor: Aeronaut actro-N 28-4-880, 28x34mm, 880kv Prop: Aeronaut CAM Z Carbon 11 x 8 folding props Battery: SLS Quantum 2200mAh 3S 40C/80C ESC: Graupner BRUSHLESS CONTROL + T 35 Receiver: Graupner GR-16 HoTT, 8 channel Servos: Graupner DES 428 BB MG for elevator, ailerons and brakes, Graupner DES 476 BB for rudder Cover: ORALIGHT transparent red, ORACOVER black, ORACOVER white Stickers: d-c-fix white semi gloss vinyl Other material: Roll wrapped carbon fiber tube 10 x 9mm (Seta-Tech 1110 - https://seta-tech.gambiocloud.com/CFK...) to replace the original pulltruded carbon fiber tube from the kit Prop adapter 4,0/8 (Aeronaut AN712404) Aeronaut Z-Spinner CoolNose (Diam. 30mm) (Aeronaut AN725171) Wing/fuselage cable connetors: Multiplex MPX M6-50 (MPX 1-01221 and MPX 1-01222) Servo wires: Höllein HOESKV14GR servo wire twisted, 3x0,14mm2 ORACOVER hotmeltglue (Oracover 960) Screws for aileron servo attachment to frame: 1,7 x 6 mm (https://minischrauben.com/blech-holzs...) Screws for aileron servo plate attachment to support: 2,3 x 8 mm (https://minischrauben.com/blech-holzs...) Screws for brake servo plate attachment to plate: 2,3 x 8 mm (https://minischrauben.com/blech-holzs...) Link to free STL files for 3D printed parts (MPX connector mounts, Servo frame): https://drive.google.com/file/d/1JuFT... Link to my DIY Helping Hand build video:    • DIY Helping Hand (Third Hand) - Build Video   Cutting machine: BROTHER ScanNCut SDX1000 Cameras: Sony HDR-CX730 Insta360 Go 2 Insta360 One x Microphone: Rode NTUSB