Dietrich Shank Manure Dragline Injector- Our Manure equipment Shop Projects скачать в хорошем качестве

Dietrich Shank Manure Dragline Injector- Our Manure equipment Shop Projects

https://www.hooverag.com Do you want a Dietrich Shank injector? We make custom injectors for your application. Here is a new injector for us. It's going to New York to Delvin Martin. It's a Dietrich shank. This is the Python injector. So this can swing from side to side. So the the injector shank has 30 degrees of pivot left to right. Also on here we have our swing our stops these slide front. So right now that are slid back for when you're folded up. So you don't smash your tractor cap. And then you pull the pin. And this slide's front. So when you're injecting turning around at the ends, we want to keep the injector in the ground the whole time. And this allows the swing pipe to go beyond 90 degrees. So it gets it front beside the tractor. So that makes it easier to turn around. And then we also have the extendable swinger. And that is where the swinger telescopes out with the extendable swinger. And this moving swinger stop. It allows you to turn around at the ends with a straight frame tractor, and you don't need to back up. The Dietrich Shanks will take about twice the horsepower as our Hoover low disturbance injectors do is. This is going in deep and they're trying to go six eight inches with this injector with the Hoover ones. We're trying to go just 3 or 4in and a little disturbance. So it takes less horsepower. So on this particular bar it's a ten unit bar plus a hose. You're going to want about 300 horsepower. The question we get to ask a lot is, is why Dietrich Shanks? They do a really good job of burning mine. Or if you want to put 15 to 20,000 gallons in the air and you want it all under the ground, this is the injector to have. If you have Rocky ground or stuns. This is not the injector to have because it is a shank. You are going to pull stones up. My focus with the Hoover low disturbance injectors is it's a disc opener. It's a low disturbance, so we want to keep the stones down under the surface. But if you don't have a problem with stones and you want high rates and you're not know till this one works, these injectors are fun to run. You know, if you're doing anywhere from 15 to 20,000 per acre and you look out the back and there's nothing on the surface, it does make you feel good because the minor is all under the ground. Now, one thing is it will stay wet for a long time because you got all of that manure under the ground. It takes a while for dry out. Don't go driving in your field. The next day and think that it's going to be ready to plant corn. Now we'll go inside in the shop and we'll show you what we're currently working on. Here is a puck swinger. This is for Spring Lake Farms in New York. They want us to put our patented folding mechanism on here so that when they go down the road, that on the big tail hanging way out the back. So that's in here right now. We're getting ready to take it apart. Put the hinge on it with the hydraulic locking pin. Here we have a 24ft Hoover injector. This is the low disturbance. This is a dragline bar. It's got the extendable swinger. And this one also has the moving stops so that when you turn around at the end, the swinger can move beyond 90 degrees to come. Basically wrap around the side of your tractor so it's easier to turn around. This one we're building for stock. So it is currently available. I am Eric Hoover, from Hoover AG. We build the dragline equipment. We do approximately 40 million gallons a year of custom pumping. And then we specialize in an orange hose reels and related dragline equipment.