Ruger PC Carbine Exact Edge Extractor – Install Guide & Reliability Upgrade скачать в хорошем качестве

Ruger PC Carbine Exact Edge Extractor – Install Guide & Reliability Upgrade

In this video, we install an Exact Edge extractor and A2 tool steel bolt head pin kit in the Ruger PC Carbine. The goal of this upgrade is to enhance extraction reliability and replace key small parts with precision-machined components for more consistent performance over time. We start by verifying that the firearm is clear, then review the parts and tools needed. Next, we remove the barrel, separate the receiver from the stock, and take out the trigger group and charging handle to access the bolt assembly. The video walks through complete bolt disassembly, a review of the factory extractor and pins, and a comparison with the upgraded Exact Edge extractor and A2 tool steel pins. After installing the new parts, we reassemble the bolt, reinstall it into the receiver, reattach the trigger group and stock, and finish with a function check. This guide is intended for responsible Ruger PC Carbine owners who want a clearer understanding of how the extractor system and bolt head pins work, and how to address common extraction-related issues through careful parts replacement and maintenance. The installation approach shown can be applied to both 9mm and .40 S&W PC Carbine models that share the same bolt design. TIMECODES: Intro - 00:00 Parts Needed - 01:58 Tools Needed - 02:23 Firearm Clear / Removing Barrel - 02:36 Removing Receiver from Stock - 02:54 Other PC Carbine Upgrades - 03:29 Separating Trigger Guard from Receiver - 04:36 Removing Charging Handle - 05:00 Removing Bolt Assembly - 05:21 Factory Buffer Overview - 05:57 Bolt Disassembly - 07:17 Bolt Parts Review - 09:49 M*CARBO Parts Overview / Parts Comparisons - 10:06 Bolt Reassembly - 12:43 Reinstalling Bolt into Receiver - 14:51 Reinstalling Trigger Group - 15:30 Reinstalling Stock - 15:51 Reinstalling Charging Handle - 16:29 Reattaching Barrel - 16:57 Function Check - 17:19 Wrap-Up / Outro - 17:31 Safety & Responsibility: Always verify that your Ruger PC Carbine is completely unloaded before beginning any work. Remove the magazine, lock the bolt open, and visually and physically inspect the chamber to confirm it is clear. Keep the muzzle pointed in a safe direction at all times and follow standard firearm safety rules. Work in a clean, organized environment and use appropriate tools to avoid damaging the bolt, extractor, or receiver. After replacing any extractor, pins, or other bolt components, perform thorough function checks and test the rifle at the range with appropriate ammunition to confirm safe, reliable feeding and extraction. Watch for signs of abnormal wear or ejection patterns and stop immediately if anything seems unsafe. If you are unsure about any part of the disassembly, installation, or reassembly process, or do not feel fully confident performing it yourself, consult a qualified gunsmith. This content is for educational and informational purposes only and is intended for responsible, legally authorized firearm owners in accordance with all applicable local, state, and federal laws. #MCARBO #RugerPCCarbine #RugerPCC