TBS Crossfire Micro TX V2 to Nano Retrofit kit (JR to Lite conversion) скачать в хорошем качестве

TBS Crossfire Micro TX V2 to Nano Retrofit kit (JR to Lite conversion)

Check out https://www.pcbway.com/ for custom printed circuit boards, electronics, and rapid prototyping services (Use my referral link to get $5 of New User Free Credit https://www.pcbway.com/setinvite.aspx...! Here's how to convert the TBS Crossfire Micro TX V2 from a size that fits JR style bays to the newer and smaller Nano (aka Lite) size. I couldn't find good details/images of this conversion process, so I'll show you how I swapped out mine. You will need to remove the JR-style 5-pin connector from the Micro TX V2 to fit into the Nano housing. After I installed the Crossfire module on the Radiomaster ZorroI had some difficulty getting it to connect with the previously bound receivers. IIRC I had to update the CRSF module and receivers. I'm pretty sure this was unrelated to changing to the Nano housing, but if you have similar issues please let us know in the comments. Thanks for watching! 🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/ Want to support RCwithAdam? ↴ KO-FI: https://ko-fi.com/rcwithadam Thanks! ------- Mandatory Affiliate Disclaimer: Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link. *DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!* ----------- About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing! #RCwithAdam