1979 Puch Magnum Project Part 15 - 12VDC / Lighting скачать в хорошем качестве

1979 Puch Magnum Project Part 15 - 12VDC / Lighting

(Links to Parts used at the end) Video shows, 00:00 - Quick After Video 00:27 - Electrical Plan and Design 17:04 - Test Start 17:56 - Install 26:40 - Floating Ground on Stator 42:13 - Headlight Install 49:36 - Tail Light/Licence bracket make/install 1:02:53 - Test Ride at night (Links to Parts used at the end) I'd already installed Treats CDI Adventure Pack Version 2 in video 13, but I just rigged it quickly to be able to run the Motor - No lights or anything. If this video misses anything, its probably in that or number 14 (installing the Stator/Magneto and Timing etc). This video is long enough, so I hopefully skipped or edited down anything I've already shown in previous ones. I make an aluminum plate to organize the electrical bits under the side covers of the Magnum. I changed things around so the plate will be different in the video as I make adjustments (and I ended up moving from the included regulator to the full bridge rectifier of the TrailTech so the diagram has a few iterations too). Then floating the ground on the 12V Coil and running that through a TrailTech 7004-RR150 Regulator/Rectifier with a Bat-Pac Battery Eliminator - the Regulator needs something like the Bat-Pac, Small Battery Pack or a large Capacitor to work properly - it puts out 7v at idle going to 0v at higher rpm without it. With the Bat-Pac it is around 12v at idle, goes to 14v with a little throttle and stays there through higher RPM's. I'm using 20W Halogens and bulb adapters for the Headlight and a "vertical fixation RED LED tail light". Wire's are organized with TechFlex, zip ties etc. I do use dialectic grease on the connections (I show it only being applied to the headlight). My remaining to-do list is just add Decals and a Black LTD front fender and when I can get a welded clutch bell, install the Hammer Clutch. Puch e50 CDI complete adventure pack (Magneto, Stator with 12v coil, pietcard CDI ignition box - 2041 etc) https://www.treatland.tv/ProductDetai... Bat-Pac - http://www.amazon.com/gp/product/B00C... Trail Tech Rectifier/Regulator - http://www.amazon.com/gp/product/B00J... 12-Position European-Style Mini Terminal Strip http://www.radioshack.com/product/ind... Pin Terminals for the Strip http://www.amazon.com/gp/product/B00F... 20w Halogen Bulbs - http://www.amazon.com/gp/product/7542... Bulb Adapter - http://www.amazon.com/gp/product/B003... Tail Light - https://www.treatland.tv/red-fixation... TechFlex wire loom (I mainly used 3/8" with a small amount of 1/4") http://www.amazon.com/s/?_encoding=UT... Brake Switch https://www.treatland.tv/brake-light-...