Norden 901 Aurora Operation Test скачать в хорошем качестве

Norden 901 Aurora Operation Test

The Norden 901 has a unique auxiliary fog light button that allows for it to be depressed and not latched down (almost light a high beam flasher). Using this function will allow the user to switch between programing options with the Skene controller. Light operation: The Aurora auxiliary light with yellow daytime halo ring has three different visibility options. Default is Conspicuous mode-ON (The Aurora yellow halo ring will flash) Operation: Turn your bike on, yellow halo light ring inside the Aurora is on and flickers to increase your visibility to others, main driving light is off. High beam = Aurora diving lights at 100%, yellow ring shuts off Low beam = Aurora diving lights off, yellow ring turns on flashing Turn Signals – the Aurora yellow halo ring will ALWAYS default to a turn signal when the turn signal is used. Daytime running mode-Conspicuous mode Off (The Aurora yellow halo rings stay solid yellow) Operation: Quickly press the factory fog light button 4 (four) times without locking it into position, (push button approximately halfway down each time). Use this process of 4 button presses to turn this function off & on High beam = Aurora diving lights at 100%, yellow ring shuts off Low beam = Aurora diving lights off, yellow ring turns on and stays solid Turn Signals – the Aurora yellow halo ring will ALWAYS default to a turn signal when the turn signal is used. Auxiliary Driving Light Mode (The Aurora driving lights are on, and yellow halo rings off) Operation: two options for setting this up. Option 1: Start the bike and quickly press the factory fog light button 2 (two) times without locking it into position. Use this process of 2 button presses to turn this function off & on Option 2: press down and lock the factory fog light button and the Aurora’s will function in Aux-mode High beam = Aurora diving lights at 100% Low beam = Aurora diving lights at 50% The low beam intensity is factory set to 50%, see Skene controller instructions to increase or decrease the intensity of your low beam. Turn Signals – the Aurora yellow halo ring will ALWAYS default to a turn signal when the turn signal is used.