6'' Width 18'' Length Harig AUTOSTEP SURFACE GRINDER, PROGRAMMABLE AUTO IDF, 3X AUTO FEEDS скачать в хорошем качестве

6'' Width 18'' Length Harig AUTOSTEP SURFACE GRINDER, PROGRAMMABLE AUTO IDF, 3X AUTO FEEDS

6" X 18" HARIG "AUTOSTEP" (MADE IN THE USA) SURFACE GRINDER  WITH PROGRAMMABLE AUTOMATIC INCREMENTAL DOWNFEED      S/N: 6799-H         NEW: 1987     WIDTH& LENGTH GROUND ............................ 6" X 18" VERTICAL WORKING HEIGHT UNDER 7" WHEEL ............ 12" LONGITUDINAL TABLE TRAVEL ......................... 18-3/4" LONGITUDINAL TABLE SPEEDS ......................... 0 TO 70' FPM AUTO CROSS FEED PER TABLE PASS .................... 0 TO 3/32" DOWNFEED OF GRINDING WHEEL RATE ................... 0.9"/MIN. RAPID UP/DOWN TRAVERSE ............................ 2-1/2"/MIN. AUTO DOWNFEED INCREMENT PER PASS .................. 0.0001" TO .0099" GRINDING WHEEL .................................... 7" X 1/2" X 1-1/4" MAXIMUM GRINDING WHEEL DIAMETER ................... 8"   FLOOR AREA OPERATING SPACE ........................ 71" X 45" APPROXIMATE WEIGHT ................................ 1,500 LBS     MACHINE FEATURES: HARIG "AUTOSTEP III" AUTOMATIC INCREMENTAL DOWNFEED CONTROL FEATURING: -5 DIGIT THUMBWHEELS TO PRESET TOTAL DEPTH -2 DIGIT THUMBWHEELS FOR SETTING DOWNFEED INCREMENT FOR   FEEDING @ BOTH LEFT & RIGHT, OR LEFT ONLY OR RIGHT ONLY -THUMBWHEEL TO PRESET 1 TO 9 AUTO SPARKOUT PASSES -AUTOMATIC CYCLE INCLUDING RAPID RETURN STARTING POSITION -JOG BUTTON FOR REPOSITIONING 0.0001" PER JOG -RAPID TRAVERSE BUTTON -DIGITAL READOUT DISPLAY -"AUTOSTEP III" FEEDS IN BOTH PLUNGE OR SURFACE GRINDING MODES   HYDRAULIC TABLE TRAVERSE ELECTRO-MECHANICAL CROSS FEED (DIAL CONTROLLED) HARIG SUPER-PRECISION DIRECT DRIVE CARTRIDGE TYPE SPINDLE     EQUIPPED WITH: 1 H.P. LEESON GRINDING SPINDLE MOTOR, 3/60/208-230-460 VOLTS "TOOL STEEL HARDENED WAYS" OPTION 6" X 18" WALKER FINE-DIVISION PERMANENT MAGNETIC CHUCK COOLANT SYSTEM, WITH TANK, PUMP & GUARDING,   TUCKS IN THE BASE OF THE MACHINE ON THE RIGHT SIDE MACHINE IS PRESENTLY WIRED FOR 3/60/220 VOLTS   SPECIAL NOTE: THIS MACHINE IS 100% OPERATIONAL.  THE SPINDLE IS NICE AND QUIET, AS IS THE HYDRAULICS.  THE MACHINE IS GETTING GOOD LUBRICATION.  THE BACKLASH ON THE CROSSFEED LEADSCREW  IS VERY LITTLE.  WE HAVE A WINNER!        ** INSPECT UNDER POWER IN OUR HARRISON, N.J. WAREHOUSE ** ** SUPERB MACHINE & CONDITION - ORIGINAL PAINT **