How to choose the right Friction and Screw Earring Backs скачать в хорошем качестве

How to choose the right Friction and Screw Earring Backs

Find these Earring Components and tons more findings at http://www.gempacked.com/findings-jew... We are going to show you some friction and screw backings. We have a few different ones here in different sizes and with different holes. With Friction Push Backs, the most important thing to check is that the hole is a little bit bigger than the post. For example this post is about 0.6mm and this earring back has a 0.95mm hole. It works just fine and it holds nice and strong. You won't have to worry about it coming off. This stud earring is actually a lot thicker, about 0.85mm, but it works just as well. The backings are basically interchangeable between those posts. It's a lot easier to find push backs to work with a stud earring or post, but screw backings are not as easy. You have to make sure the hole size and the thread count match. You don't have the same flexibility with different size posts and the thread count has to match exactly or it won't screw in properly. It's easiest to buy these as a set if possible, but if you have any questions about which posts and backings are compatible you can just ask us!