How To Dry Mount Artwork (Without Air Bubbles!) скачать в хорошем качестве

How To Dry Mount Artwork (Without Air Bubbles!)

In this video we show you how to quickly and easily dry mount a poster or print using self adhesive board. Following these steps minimises the risk of air pockets. It gives a smooth finish and prevents ripples. Take a look at self-adhesive mount board https://bit.ly/43JBd80 Cut a piece of self adhesive board around 100mm larger than the aluminium print. If you're adding a window mount, increase the border so it's wide enough to stick the mount onto. Peel back first 50mm of release paper. Centre the print over the board, on top of the release paper. Press the leading edge onto the adhesive smoothing it with a clean microfibre cloth. Work your way up in stages, smoothing with the microfibre cloth as you go. Don't remove the final section of the release paper. Lay it back down over the print and use a brayer roller to get a really good bond. You can also run it through a roller laminator at this stage. The mounted print should be left to cure for 24 hours. Trim the edges and then it's ready to frame. This technique is suited for low value and reproduceable artwork. #pictureframing #pictureframe #artwork