Burris XTR Signature Rings скачать в хорошем качестве

Burris XTR Signature Rings

Burris XTR Signature Rings CLICK LINK TO SHOP: https://bit.ly/2LQNKSI These new Burris XTR Signature Rings were designed for the tactical shooter. They deliver plenty of holding power, with less weight & allow the shooter to add between 5 – 40 MOA of customizable cant to their scope with no lapping required. Burris XTR Signature Rings are available in 1 inch, 30mm and 34mm. Burris XTR Signature Rings are Unique, self-centering, dual steel clamps with full cross-through connection assure proper center on any width Picatinny rail, while adding extra strength Revolutionary Pos-Align® Inserts technology, in a tactical ring configuration Pos-Align Inserts guarantee perfect centering and maximum scope-to-ring contact for tremendous gripping power without damaging the scope finish Lets you virtually sight in your gun without moving the scope adjustments Corrects misalignment caused by off-center receiver holes Hard aluminium construction with solid steel weaver locking bases Corrects for bases or rings being slightly off-center Wide 6 screw locking design No need for expensive tapered bases or shimming for thousand-yard shooting Rugged, robust aluminum tactical rings save weight and mount on any Weaver or Picatinny-style rail Each ring set of the Burris XTR Signature Rings include two sets of concentric inserts and one set each of the following offset inserts: +/-5 MOA, +/-10 MOA, +/-20 MOA Heights – include insert 1 inch Low : 12.7mm from underside of ring to where the ring would attach to the rail Medium : 19.25mm from underside of ring to where the ring would attach to the rail High : 25.6mm from underside of ring to where the ring would attach to the rail 30mm Low : 10.4mm from underside of ring to where the ring would attach to the rail Medium : 16.75mm from underside of ring to where the ring would attach to the rail High : 23.10mm from underside of ring to where the ring would attach to the rail 34mm Medium : 1 inch : 8.4mm from underside of ring to where the ring would attach to the rail High : 1.5 inch : 21.1mm from underside of ring to where the ring would attach to the rail.