Green Leaf Pioneer4You iPV2 faulty error check atomizer message скачать в хорошем качестве

Green Leaf Pioneer4You iPV2 faulty error check atomizer message

This video is showing a problem with two silver iPV2 units. The first (grey/black) unit correctly shows this atomizer firing at a steady and stable 0.8 Ohms. The second unit, was previously showing a CHECK ATOMIZER message and would not fire, but for whatever reason, decided that it would start working in front of the camera.... sort of. The base reading was 1.1 Ohms, which is 0.3 Ohms higher than it should be. As I fired it, the resistances jumps up and down, as high as 1.3 Ohms in the video. After the video, I pushed the power up to 50 Watts, at which point the resistance jumped up to 1.5 Ohms, then 1.8 Ohms, then 2.3 Ohms, then 5.1 Ohms, and after that, it would only return a "CHECK ATOMIZER" message and would not fire again. Of course, this happened off camera... The third unit, is already stuck in the "CHECK ATOMIZER" message. Prior to this, it was experiencing jumping resistance, just like the second unit.