Dukers - Change the "Low Setting" (Refrigerators & Coolers) [How-To] скачать в хорошем качестве

Dukers - Change the "Low Setting" (Refrigerators & Coolers) [How-To]

Today we will be changing the "LS" on your Dixell monitor, provided in every Dukers unit. The "LS" will set the lowest temperature allowance on your unit. 1. To access the main frame by holding down the two bottom buttons, labeled "SET" (on the right) and " AUX/ down arrow" (on the left) 2. If properly engaged the monitor will read "nP". Do not let go until the monitor reads "HY". Once you release the monitor will read "LS" 3. On the main frame you will hit the "up arrow" key until you the monitor reads "LS" 4. Hit "SET" and the monitor should be reading a temperature 5. Select a desired temperature reading using the arrow keys on the right 6. Hit "SET" and the monitor will flash and be back at the main frame 7. Let the monitor sit and it will return to the temperature reading. You have successfully set your units lowest allowable temperature reading.