How to Replace Steering Rack & Pinion Bellow 2007-2013 Acura MDX скачать в хорошем качестве

How to Replace Steering Rack & Pinion Bellow 2007-2013 Acura MDX

Shop TRQ on 1AAuto.com Steering Rack & Pinion Bellows Set https://trq.video/ia-1ASFK02595 Shop TRQ on Amazon Steering Rack & Pinion Bellows Set https://www.amazon.com/dp/B0B9YQH89W This video shows you how to install a new steering rack bellows boot on your 2007-2013 Acura MDX. The steering rack bellow is a plastic or rubber cover used to protect the joint between the steering rack and the tie rods from dirt, debris, water, and other contaminants that could corrode or damage the tie rod joint. This repair was done on a 2008 Acura MDX Base 3.7L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles: 2007 Acura MDX 2008 Acura MDX 2009 Acura MDX 2010 Acura MDX 2011 Acura MDX 2012 Acura MDX 2013 Acura MDX Tools you will need: • 14mm Wrench • 24mm Wrench • 22mm Socket • Pliers • Ratchet • Torque Wrench https://trq.video/oakV-1AXAA00044 Subscribe:    / @trq   Check out our playlist: Acura MDX 2nd Generation 2007-2013:    • Acura MDX 2nd Generation 2007-2013   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.