Step by Step Guide on How to Flash the AT Commands Firmware in A9G(GSM/GPRS + GPS) Board | IoT | скачать в хорошем качестве

Step by Step Guide on How to Flash the AT Commands Firmware in A9G(GSM/GPRS + GPS) Board | IoT |

In this video, we provide a detailed, step-by-step guide on how to flash the AT Commands firmware onto the A9G GSM/GPRS + GPS board. Perfect for beginners and those looking to ensure their A9G board is properly set up, this tutorial covers everything you need to get started. The video begins with an introduction to the necessary tools and materials, including the firmware burning tool, the firmware file, a computer, a USB to serial converter, an A9G board, and a micro USB cable. Follow these steps to flash the firmware: 📌Download Required Files: Start by downloading the firmware burning tool and the firmware file. 📌Connect Hardware: Connect the A9G board to your computer using the USB to serial converter. Ensure to provide 5-volt power to the A9G board via the micro USB cable, as the USB to serial converter may not supply sufficient power. 📌Launch Firmware Burning Tool: Open the firmware burning tool on your computer and select the downloaded firmware file. 📌Select COM Port: Choose the COM port that your A9G board is connected to. 📌Start Flashing Process: Click the start button to begin flashing the firmware. This process will take a few minutes. 📌Complete Flashing: Once flashing is complete, close the firmware burning tool. 📌Open Serial Tool: Launch the AI Thinker serial tool and connect to the COM port associated with your A9G board. 📌Swap RX and TX Pins: Ensure the RX and TX pins are swapped for proper communication. 📌Restart A9G Board: Turn off and then on the power to the A9G board to reset it. 📌Verify Firmware: Open the serial tool again and send an AT command. A response from the A9G board will confirm that the firmware flashing process was successful. This comprehensive guide ensures your A9G board is ready for use with AT commands. Don't forget to like, share, and subscribe for more detailed tutorials and tech guides! Read Blog: https://fusionautomate.in/how-to-flas... #A9G #FirmwareFlashing #GSM #GPRS #GPS #ATCommands #TechTutorial #DIYTech #IoT #Microcontroller #SerialCommunication ------------------------------------------------------------ 🌐Website: [https://fusion-automate.super.site/] 📝Blog: [https://fusion-automate.blogspot.com/] 💬Telegram: [https://t.me/PYLIN] 📞WhatsApp: [https://wa.me/message/B7RXUT4OUXWUF1] 📸Instagram: [  / fusion_automate  ] 🗺Facebook: [  / papercodein  ] 💼LinkedIn: [  / fusion-automate  ] 👨‍💻GitHub: [https://github.com/papercodeIN] 📢Join this channel to get access to perks: [   / @fusion_automate  ] ------------------------------------------------------------