Hobbyking FPV250 quadcopter FPV specs and setup KK2 fatshark - BORING скачать в хорошем качестве

Hobbyking FPV250 quadcopter FPV specs and setup KK2 fatshark - BORING

Latest update video here with Mobius prtection plate fitted:    • FPV Quadcopter update Part1 - Hobbyking FP...   Previous update video with cage/long chassis fitted:    • FPV250 Cage long frame Hobbyking Diatone M...   I am sure 2014 is the year of the micro quadcopter, I finally got this FPV250 built last week and am delighted with it, so quick run down of my spec and setup - sorry this is pretty dull. Hobbyking sell this FPV250 and also the great cage/long frame version which I'd recommend as much better protected. If you start to doze off, see my other videos for some flying footage here:    • FPV Farmyard Shed fly through - Hobbyking ...   Specs are: Specs below: FPV250 frame from hobbyking RCX 1804 2400kv motors (cw and ccw) from myrcmart (needed to slot mounting holes as the frame slots don't go small enough which is fiddly but not difficult to slot with a drill bit) Afro 12A ESC's from hobbyking (motor wires soldered straight to ESC) Gemfan 5x3 two bladed props from ebay seller floatship (orange/black for orientation) KK2 flight controller running RC911 v1.6++ firmware gains are 40, stick scaling 75 on cyclic so could go much faster if wanted, but for FPV this is fine. Fatshark 5.8ghz video transmitter Fatshark pilotHD camera (recording only, powered from spare KK port) Fatshark 600TVL camera (for FPV view as no latency) 3S 1300 nanotech lipo AR6110e receiver AUW 485g Very happy with this setup, I need to tidy up wiring a bit, also I found the legs come off in a crash which is good, but I lost one which is bad, so I have drilled slots in them and use cable ties to tether these to the arms so they can't go missing again.