PiFinder - Movable Screen ! скачать в хорошем качестве

PiFinder - Movable Screen !

This enclosure for BBLabs PiFinder ( https://www.pifinder.io/ ) PiFinder is an Electronic Finder - it replaces encoders and uses accelerometer and camera to provide accurate position. This Enclosure allows: Switching Left/Right/Flat Mode in about 1 minute Can be used basically in any position, since it can be freely rotated to have proper orientation Easy access to SD Card in any mode Integrated SugarPi Battery (also spacer for people that don't need it Can be used with imx296 and Raspberry pi HQ camera 3D Models can be downloaded from Pintables: https://www.printables.com/model/986433-pi... Printer: Prusa i3 MK3S+ Filament: Generic PETG Nozzle 0.4mm Use “Paint on Supports” and "Automatic Painting" for best results with Prusa Slicer. Beside standard DIY Kit that can be purchased from PiFinder.io List of parts used: Electrical parts were sourced from Adafruit. 40-pin FPC to Straight 2x20 IDC Female Socket Header PID: 4905 ( This one plugs to Raspberry PI) 40-pin FPC to Straight 2x20 IDC Male Plug Header PID: 4904 (This one need to be soldered in to PiFinder Keyboard) 40-pin 0.5mm pitch FPC Flex Cable with A-B Connections - 25cm long PID: 4933 I used 25cm version, but I would recommend shorter cable around 10cm would be perfect. Listed bellow hardware is for information only. I have used these vendors but i DON'T endorse them in any way. Hardware used: Button Head Hex Hexagon Socket Allen Screw Bolt: M2.5 8mm, M2.5 12mm Brass Hot Melt Insert Knurled Nut: M2.5 Outer Diam 4mm Thumb Screw: M2.5 10mm Background Music: Tennessee Hayride by Audionautix is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/by/4.0/ Artist: http://audionautix.com/